cheap race-prepped RHS block (needs repair)
#1
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Category: Engine - Complete Motors
Price: $1
Location (State): VA
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
Deck is o-ringed and block is clearanced for a 4" center counterweight bryant crankshaft.
Price lowered to $750 + ship ...
specifically, the problem is the base of the bores got beat up when the piston #2 disintegrated. Needs #1 and #2 sleeves removed, base of the bores need to be welded up(where they got beat up), re machine the bores and install new liners.
estimate was about 2K to fix:
cut out liners 1 & 2
weld up cylinder base damage
machine for new liners
install liners 1 & 2
line bore mains (if required)
line bore cam (if required)
roller cam bearings (if cam line boring required)
could have a top notch block for under a 3K investment
Last edited by Fireball; 11-13-2011 at 09:35 AM.
#4
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
to answer a few questions I received
this is a std deck RHS block
bores are 4.125"
damage is isolated to the cylinder 1 and 2 area.
only some nicking at the base of the cam bores as seen in the pictures
this is a std deck RHS block
bores are 4.125"
damage is isolated to the cylinder 1 and 2 area.
only some nicking at the base of the cam bores as seen in the pictures