Siemens 70 lb F-body 98-02 injectors
06-22-2011, 06:13 PM
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Apr 2008
Location: odessa
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Siemens 70 lb F-body 98-02 injectors Category: Engine - Intake/Fuel
Price: $300
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): TX
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
# The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
# Compatible with alternative fuels (i.e. E85, Methanol)
# Longer service life
# High-speed disc action allows wider dynamic flow range for improved idling
# Quieter operation
# Revolutionary disc design resists build up deposits which can affect fuel flow.
# No Fuel leakage for quicker starts
Flow Tested at 43.5 PSI at 60.58 lb, 70.03lb at 58PSI (this is the number you are looking for since gm vehicles run at 58 PSI of fuel pressure!
Let me know, I respond better to PM's
Thanks, Jake
06-24-2011, 01:48 PM
#2
On The Tree
Thread Starter
iTrader: (13)
Join Date: Apr 2008
Location: odessa
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Here I have a brand spanking new never installed set of Siemens 70 lb injectors for a 98-02 F-body LS1! Had full intentions of using them, however they were fine for my application until I decided to go up on compression and more on N2O! So they won't work for me, I gave 450 for these bad boys and I am offering them for 300 shipped! Pretty good deal since they are brand new. Here is some info on them below.
# The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
# Compatible with alternative fuels (i.e. E85, Methanol)
# Longer service life
# High-speed disc action allows wider dynamic flow range for improved idling
# Quieter operation
# Revolutionary disc design resists build up deposits which can affect fuel flow.
# No Fuel leakage for quicker starts
Flow Tested at 43.5 PSI at 60.58 lb, 70.03lb at 58PSI (this is the number you are looking for since gm vehicles run at 58 PSI of fuel pressure!
Let me know, I respond better to PM's
Thanks, Jake
# The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur.
# Compatible with alternative fuels (i.e. E85, Methanol)
# Longer service life
# High-speed disc action allows wider dynamic flow range for improved idling
# Quieter operation
# Revolutionary disc design resists build up deposits which can affect fuel flow.
# No Fuel leakage for quicker starts
Flow Tested at 43.5 PSI at 60.58 lb, 70.03lb at 58PSI (this is the number you are looking for since gm vehicles run at 58 PSI of fuel pressure!
Let me know, I respond better to PM's
Thanks, Jake
Bump guys......anyone have any offers! I will entertain serious ones! Let me know!
