BottleFed95Z

Category: Engine - Power Adders
Price: $1500
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): CO
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

Located in Denver Colorado

As post says, looking to sell/trade my turbo alone, or possible kit. I no longer have the goal of making 700+hp, so I no longer need this setup. I can sell the turbo and just use another that has a T4 turbine housing, or sell the Turbo/mani/downpipe and buy or have a new mani fabbed up.

Posting here due to size of turbo. I am one of a VERY few running larger then a 62mm in the srt community, and figured it would be in my best interest to market this to other platforms it is viable on.

Info on the hardware

GT4094R:
This turbo is capable of 800 HP. This turbo is a step above the GT4088R, buy using a larger 94mm compressor wheel (68mm Inducer) to maximize power. Comes with a T4 exhaust housing with 3.00" V-BAND exit. Large anti-surge compressor housing with 4.00" inlet and 2.50" outlet.

Compressor:
-Wheel: 94mm w/ 52 trim. 68mm Inducer
-Housing A/R: .72 a/r
-Housing Style: 4" inlet anti-surge, 2.5" outlet

Turbine / Exhaust:
-Wheel: 77mm w/ 78trim
-Housing A/R: .85 A/R
-Housing Style: T4 w/ 3" v-band exit.

Center Section:
-Dual Stainless Steel Ball Bearings
-Oil & Water Cooled

I ran it at 20psi @ 7800 rpm for a while, and this thing is a highway monster. 20psi on pump w/ 8.8:1 and built head was seen at 5400 rpm.

These retail for $1,859.00
With around 9k miles on her, im asking $1500 obo PLUS SHIPPING. She is in great shape!
I am willing to trade for a billet wheel Journal or DBB 57mm - 62mm turbo + cash

As for the rest of the kit, here is some info: (I know this doesnt apply to most of you guys, but there may be another srt owner among us!)

Manifold is a Custom DCR pro series equal length manifold
Downpipe is a Custom DCR Pro series Down pipe
Dump tube is also a custom dcr pro series unit.

Manifold is $1200.00 new
Downpipe is $395.00 new
Dumptube is $250 new

All the piping + Turbo is $3695 without wastegate.

Im willing to let ALL of this go for $3000. or willing to TRADE for a 57-62 mm Turbo w/ manifold, downpipe, dump tube + cash.

If interested please call/text at 303-669-7896.

Few pics of the hardware installed

BottleFed95Z

bump!