Hinson LS1 RX7 FC motor mounts with clam shells, T4 Turbo Blanket
#21
TECH Enthusiast
iTrader: (21)
Join Date: Mar 2009
Location: Sacramento Ca
Posts: 619
Likes: 0
Received 0 Likes
on
0 Posts
Category: Drivetrain
Price: $123456789
Part Fits: 93-02 Chevrolet Camaro
Location (State): IN
Item Condition: Brand New
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
#22
200 shipped for the engine mounts, the clam shells and the trans mount from Grannies.
Think about it, its gonna be an easy 25 bucks to ship it and im loosing 3% for paypal. Unless you gift it. But im not taking less then 200 for the mounts. End of story
Got a good buddy here says he'll have the money in about 2 and half weeks. WIlling to give me 200 cash for it all.
Your call...
Think about it, its gonna be an easy 25 bucks to ship it and im loosing 3% for paypal. Unless you gift it. But im not taking less then 200 for the mounts. End of story
Got a good buddy here says he'll have the money in about 2 and half weeks. WIlling to give me 200 cash for it all.
Your call...
#25
As far as i know, it will fit my powerglide, th350 and 400 transmissions. The only swap parts i have are whats listed. I have a few pieces from the car, dash cluster, door sills.
Engine mounts
Clam shells
Trans mount
Ill even through in my brand new prothane poly urethane trans mount to go between the trans and mount itself. As far as bolts, i was told to hold the mount up with it bolted to the trans, mark for the holes, drill them in and use grade eight bolts and to use a piece of 3/8 steel on the inside to give it some more strength, nothing special.
The bolts for the hinson mounts are in the picture and will be sent with them. They install very straight forward, aluminum sleeve down through rx7 subframe, metal washer underneath with the supplied nut and lock washer. piece of cake
I see you are in Indiana, if your not too far from Indy, id be happy to meet ya somewhere and go over everything in person. You'll understand how easy these are with them in your hands
Engine mounts
Clam shells
Trans mount
Ill even through in my brand new prothane poly urethane trans mount to go between the trans and mount itself. As far as bolts, i was told to hold the mount up with it bolted to the trans, mark for the holes, drill them in and use grade eight bolts and to use a piece of 3/8 steel on the inside to give it some more strength, nothing special.
The bolts for the hinson mounts are in the picture and will be sent with them. They install very straight forward, aluminum sleeve down through rx7 subframe, metal washer underneath with the supplied nut and lock washer. piece of cake
I see you are in Indiana, if your not too far from Indy, id be happy to meet ya somewhere and go over everything in person. You'll understand how easy these are with them in your hands
#26
As far as i know, it will fit my powerglide, th350 and 400 transmissions. The only swap parts i have are whats listed. I have a few pieces from the car, dash cluster, door sills.
Engine mounts
Clam shells
Trans mount
Ill even through in my brand new prothane poly urethane trans mount to go between the trans and mount itself. As far as bolts, i was told to hold the mount up with it bolted to the trans, mark for the holes, drill them in and use grade eight bolts and to use a piece of 3/8 steel on the inside to give it some more strength, nothing special.
The bolts for the hinson mounts are in the picture and will be sent with them. They install very straight forward, aluminum sleeve down through rx7 subframe, metal washer underneath with the supplied nut and lock washer. piece of cake
I see you are in Indiana, if your not too far from Indy, id be happy to meet ya somewhere and go over everything in person. You'll understand how easy these are with them in your hands
Engine mounts
Clam shells
Trans mount
Ill even through in my brand new prothane poly urethane trans mount to go between the trans and mount itself. As far as bolts, i was told to hold the mount up with it bolted to the trans, mark for the holes, drill them in and use grade eight bolts and to use a piece of 3/8 steel on the inside to give it some more strength, nothing special.
The bolts for the hinson mounts are in the picture and will be sent with them. They install very straight forward, aluminum sleeve down through rx7 subframe, metal washer underneath with the supplied nut and lock washer. piece of cake
I see you are in Indiana, if your not too far from Indy, id be happy to meet ya somewhere and go over everything in person. You'll understand how easy these are with them in your hands