Category: Accessories
Price: $1234
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): GA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine

This is my first For Sale thread on LS1Tech, but I've bought alot of parts here and sold stuff on Ebay under this same user name if you want to check my feedback there. Local pickup of large items is preferred, but I can arrange shipping at the buyer's expense. I can text or email pics. Some of the parts have not been removed yet, but on those I will not take payment until the part is ready to ship. I will be adding more parts probably including some BBC and 12 Bolt parts. Prices do not include shipping or paypal fee. My zip code is 31061. Parts located in middle Georgia.
PM or text (478) 363 - 2126. Thanks for your interest, Jason

Parts removed from 50k mile 1998 Camaro SS:

LS1 Front Brake Parts - Spindles, Hubs, Calipers, Pads, Rotors, Hoses, Hardware - $150
LS1 Rear Brake Parts - Rotors, Calipers, Caliper Brackets, Pads, E-brake shoes, Hoses, Hardware - $150
3.42:1 Ten Bolt Posi Rearend - Not the original rear to the 98 SS...this had been replaced at some time. Stock 3 channel ABS, M6 - LS1 Rearend complete less caliper brackets and other brake parts - $250 (Or complete with brakes for $350)
1998 SLP/SS One on the Left Exhaust - this is the one with the single big stainless tip on the driver's side - $100
__________________________________________________ ________________
Misc. LS2 / LT1 / LT4 and F-body parts:

Suncoast 93-97 Camaro Z Style Ram Air Hood - White - This is the LT1 Firehawk syle ram air, but for a Camaro. Beautiful condition and a very unique hood. Great for people wanting to do the LS1 Lid Swap. $375 (Sale Pending)

Switch panel covers for manual window Camaros & Firebirds - $12 each shipped
93-97 Trans Am front bumper impact bar - off 95 TA - $40
Torsen Three Series Ten Bolt Posi Unit - 28 spline - $150
3.42 Posi 4 Channel ABS Rearend from 1995 Trans Am M6 - $300
"Ebay" CAI - $25
Brand New In Box 350 SBC (or LT1) .030" over (4.030") Cast Pistons with Pins - $80
Stock LT1 Pistons & Rods - $50
LT1 Exhaust Manifolds - $35 pair
GM Aluminum Four Barrel Intake, GEN1 - NOT LT1 - Spread Bore flange - $25
LT1 Lifters, Guides, Spider, Pushrods, Rockers, Hardware - Have a few sets - $40
LT1 EGR Valves & AIR Pumps/Hoses/Brackets - Make an offer
LS1 style Truck (4.8/5.3/6.0/6.2) Six quart oil Pans - $40 each (Have 2 or 3 of them)
5.3L Front & Rear Covers - $25 each (Both for $40)
5.3L Valley Cover - $10
5.3L Rockers, Stands, Pushrods, 31,999 miles - $50
5.3L Rockers, Stands, Pushrods, unkown miles - $35
(8) Rockers, both Stands, (16) Pushrods from 36k mile '06 GTO LS2 - $40
5.3L Cylinder Heads - complete - $100
5.3L Cylinder Heads - bare - very low miles - $50
1984 Trans Am Tail Lamps and center panel - $50
1994 Z28 Automatic A4 Console and Shifter Assembly - $100
1984 Corvette Radiator, used but good condition, pulled from running automatic car - $50
Flowtech 1982 - 92 Camaro Firebird 3rd Gen SBC 305 / 350 shorty headers, uncoated, Non-emissions, 1 1/2" primaries & 2 1/2" collectors - $50
Custom Y pipe for above with Flowmaster 2.5" to 3" merge - $50
Heddman shorty headers and Y for 82 - 92 Fbody 5.0L/5.7L, uncoated, Non-emissions, 1 5/8" primaries & 3" collectors - $150
1.8:1 Ratio Summit Racing Roller Rocker Arms for LS1/LS6
Part #SUM-6981-1 (Part # SUM-6981 for a set of 16)
From Summit's ad: "Our lightweight, CNC-machined aluminum roller rocker arms have premium needle-bearing fulcrums for stable operation, reduced friction and wear, plus increased horsepower. The pedestal-mount rocker arms are an easy upgrade on 1999 and later LS1/LS6 engines and don't require changing valve covers. The rocker arms come with pedestals and have an anodized finish." I have 2 PAIRS of these BRAND NEW, Never bolted on with hardware....meaning I have a total of 4 roller rockers, 4 pedestals, etc. These sell for $43 EACH from Summit and for $350 for a set of 8. I will take $40 plus shipping and paypal fees for all 4 of them.
(These fit any cathedral port heads...not sure, but I don't see why they wouldn't work on the exhaust side of LS3/L92 heads too?)
__________________________________________________ ___________
3rd Gen Trans Am "grid" style Tail lights & center panel in really good shape.. fits 82-92...(correct for 87-92?) - $75 - SOLD
Weld Pro Star 15"x10" with 7.5" BS - 5x4.75" BC - Single Wheel with cap - $100 SOLD
TA rearend cover / girdle for 7.5" / 7.625" Ten Bolt - $100 - SOLD
BMR Boxed LCA's Red - $75 - SOLD
1995 Trans Am Tail Lamps and center panel - $50 - SOLD & now wish I'd kept
#243 Casting LS2 / LS6 Style Cylinder Heads, 31,999 miles, complete with Springs, Regular valves, NOT Hollow stem - $350 - SOLD
#243 Casting LS2 / LS6 Style Cylinder Heads, 36k miles, complete with "yellow" springs, Regular valve, NOT Hollow stem - $400 - SOLD
2006 GTO LS2 Oil Pan, Pickup, Windage Tray from 36k mile engine - $200 - SOLD
LT4 HOTCam - $125 - SOLD
LT4 HOTcam Valvesprings, NEW never installed - $40 - SOLD
1.6 Roller Tipped Self Aligning Rocker Arms, Invest Cast C.A.T. brand (Look like Comp Cams Magnum Rockers) 3/8" stud - NEW never installed - $85 - SOLD
Edelbrock Headers & Y - pipe, uncoated so they have surface rust, but they are not bent up and still in good shape other than cosmetics - $125 -SOLD
98 SS Complete Front Clip - No damage - Sebring Silver, All brackets, bolts, etc., Fenders, everything except the hood, Complete Bumper Assembly, Washer System, Headlights, Foglights, Park/Turn Signal Lamps - SOLD (for $600 less hood)
5.3L Valve Covers, dirty but good condition - $25 - SOLD
5.3L Valve Covers, Clean from 31,999 mile engine - $35 - SOLD
Moroso CAI - the K&N filter is rough but useable - $60 - SOLD
1998 OEM Ram Air SS Hood - Sebring Silver - $800 - SOLD
Brand New In Box - Flowmaster 17134 American Thunder Exhaust System Single Rear Exit Incl. 3 in. Tailpipe 30 Series Muffler w/Dual Cats (easily adapts to any 93-02 Fbody and flows better than the crossflow muffler) - $200 - SOLD
LS1 Rack & Pinion - $100 (Decided to keep it...lol)
LS1 Radiator - Automatic - $60 - SOLD
LS1 Dual Fan Assembly - $90 - SOLD
GM 3.23 Ring & Pinion - $50 - SOLD
93-96 Camaro LT1 style Tail lights - $50 SOLD
SLP Cold Air Intake for LT1- Never Installed - Black with Blue Filters - $150 - SOLD
LS1 Front Calipers, Brackets, Pads, & Rotors - Plenty of life in pads and rotors - $75 - SOLD
Aluminum Double Adjustable (On car adjustable) rear lower control arms with Heim Ends (Rod Ends) including all spacers and hardware. $125.00 - SOLD
Single O2 Simulator - $25 - SOLD
CC306 Camshaft, BNIB - $200 - SOLD

 

Pm sent.

 

PM sent, i will come pick up the 243s this week

 

What's the dimensions of the Corvettte radiator? Photos?

 

how much for headlights

 

Pics of the 95 T/A tails?

 

Does fan assembly come with wiring

 

Can you send pics of the bmr lower control arms interested.

 

PM sent...

 

pm sent

 

I purchased lower control arms and they were as described by seller. Very honest and strait forward. Great person to deal with. Fast shipper

 

PM Sent - interested in k-member.

 

Do u still have the unknown airfoil? Does it have the screw with it? Is that 15 shipped to 98370?

 

Pm sent

 

Sent a text about the cam

 

PM sent.

 

Bump for a great seller! Someone needs to buy the LS1 SS hood!

 

Bump for Pics of the hood

 

Still have the brake parts? Front and rear?

 

just throwin' this out there

that Flowmaster system - I have the same one on my '93 and frankly, I'm shocked noone has jumped on it. Its mild and deep at idle and absolutely screams like a pissed off Ferrari at WOT. Inside, its quiter than stock and there's no drone/resonance whatsoever inside. My butt dyno says I picked up a solid 10hp over the Borla adjustable system it replaced