View Poll Results: Keep the single turbo or go twins
Keep Billet S488 with 100mm exhaust
0
0%
Twin Billet S366
0
0%
Twin cast S475
0
0%
Voters: 0. You may not vote on this poll
370 billet 85mm 8.87@150 on Pumpgas Upgrading to 25.3 going for 7s
#1
370 Billet 88mm 8.87@150 on Pumpgas Upgrading to 25.3 going for 7s
The setup was a 370 procharger f1a, tfs235, hi ram intake, ljms cam, th400 that went 8.98@151
It was time for a change made the switch from procharger to turbo after blowing up 2 brand new blowers from procharger.
So i sold all of the procharger stuff to go turbo. Give LJMS a call to see what he recommended. He set me up with a custom cam, bw billet 85mm turbo, twin tial 44mm wastegates and a ptc 9.5 converter
Got all my parts in give a friend who works at jm fabrications a call to build the turbo kit it was done in a few weeks and looks great. I used a truck manifold for the drivers side a c6 manifold for the passenger so i can still put a/c in the car. Its 2.5inch stainless steel hot side to a t6 flange 5 inch down pipe out the front bumper. The cold side is 3.5inch piping with a chiseled 1300hp air to air intercooler.
It was time for a change made the switch from procharger to turbo after blowing up 2 brand new blowers from procharger.
So i sold all of the procharger stuff to go turbo. Give LJMS a call to see what he recommended. He set me up with a custom cam, bw billet 85mm turbo, twin tial 44mm wastegates and a ptc 9.5 converter
Got all my parts in give a friend who works at jm fabrications a call to build the turbo kit it was done in a few weeks and looks great. I used a truck manifold for the drivers side a c6 manifold for the passenger so i can still put a/c in the car. Its 2.5inch stainless steel hot side to a t6 flange 5 inch down pipe out the front bumper. The cold side is 3.5inch piping with a chiseled 1300hp air to air intercooler.
Last edited by stmz28; 12-01-2019 at 03:11 PM.
#7
12 Second Club
iTrader: (8)
Join Date: Aug 2010
Location: San Diego, CA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Do those come on all LT1 rad setups? Also, could you explain how you cut the hole in the front bumper? I am also doing a front bumper exit exhaust and don't know how to tackle it. Where did you get that air filter at?
Trending Topics
#12
12 Second Club
iTrader: (8)
Join Date: Aug 2010
Location: San Diego, CA
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
another random question.. whats that small metal piece next to the WG/BOV in the first pic, with the v band around it. I received one with my turbo and have no idea where it goes.
badass dyno video! How loud is that bumper exit? Sounds great.
badass dyno video! How loud is that bumper exit? Sounds great.
#13
TECH Addict
iTrader: (1)
Originally Posted by s25hanh
another random question.. whats that small metal piece next to the WG/BOV in the first pic, with the v band around it. I received one with my turbo and have no idea where it goes.
badass dyno video! How loud is that bumper exit? Sounds great.
badass dyno video! How loud is that bumper exit? Sounds great.
#16
#20