RARE Catback!!! ATR T-304 PITBULL **PICS / Video**
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Category: Engine - Exhaust
Price: $400
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
If you have been in the LS1 or GN world for awhile, you'll remember the ATR pitbull exhaust systems. Super high Quality, complete T-304 Stainless, and one of the best flowing mufflers made. This exhaust is in very good condition throughout. All pipes, including the I-pipe, and the muffler (exception of the tips) I would rate in atleast 9 out of 10. The muffler is polished but has a lot of fine scratches and scrapes so if I were you I would re-polish it before putting it on. You cannot see the muffler on a Firebird but on a Camaro it is visable from ground level and looks great with a mirror polish. I have brand new polished tips (3.5" rolled) that are included (but not welded on). The current tips have some scrapes and in all reality I would replace them while the system is off. The I-pipe will be cut as close to the Y-pipe junction as possible (welded)....keep in mind I have Pacesetter LTs so you might need a small section of pipe depending on your set-up.
ATR went out of business years ago (maybe 2002?) but made some EXCELLENT catbacks for GN /GNX, Supras, LS1s, RX-7s and a few other cars. All were extremely high quality and extremely high flowing and made out of complete T-304 stainless. The muffler is very straight through design (see pic) and will out flow just about anything out there except cut-out style exhausts (Borla) or bullet style systems.
If you look at my last pics of the muffler you can see how the I-pipe flows in a straight line through the muffler to the driver's side tailpipe, remaining exhaust that enters the muffler slits will exit the passenger tailpipe. The muffler doesn't Y or split inside....just straight.
Shipping (w or w/o insur) is paid by the buyer, local pick-up is great (Tampa).
I decided to make a video clip since it was (strongly) suggested in my last post.
http://www.youtube.com/watch?v=qwbHc...ature=youtu.be
Last edited by DETROIT_AREA_00_SS; 05-11-2012 at 10:03 AM.
#4
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My TA came with the non polished version of this exhaust and I love it. It's mellow at idle and while cruising, but fairly aggressive sounding at WOT but not hash sounding in any way. I had to dig pretty deep to find any threads on this exhaust but they all said that it flows like a ****. Would it be possible to take a picture of the mufflers inlet showing how straight through it is to the drivers side outlet, I only ask because I'm curious and who ever put my exhaust on tack welded the tail pipes on.
Trending Topics
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Quite a few PMs but everyone "wants a deal". I am not interested in making a deal, my asking price is EXTREMELY reasonable and a DEAL as it is. This is a high end COMPLETE T-304 system in very good to excellent condition. This is a RARE catback that almost never comes up for sale.
Still for sale!
Still for sale!