2nd Gen 8.5 inch 10-bolt, Moser axles, new GM diff
08-28-2012, 09:59 PM
#1
2nd Gen 8.5 inch 10-bolt, Moser axles, new GM diff Category: Drivetrain
Price: $1200
Location (State): IN
Item Condition: Brand New
LS Engine?: Non-LS Part
New / Unused items:
- Moser Axles with ford ends and 31 splines, 1/2 lug bolts, 5 on 4.75" pattern ***
- Moser Weld-on Ford ends and axle retainers for 10-bolt housing ***
- HD GM Differential (Looks like Auburn), 31 spline, with new bearings pressed on
- GM 3.23 Ring and Pinion gears
- Seal, bearing, crush sleeve and shim kit for GM 10-bolt
- Solid crush sleeve replacement
Used:
10-bolt 8.5" housing for 2nd Gen F-body, cleaned and painted
*** eliminates the c-clip retention of the stock GM axles - a MUST for road racing or "G Machine" use.
This stuff is all unassembled, so you don't have to take anyone's word that was "built right." $1200 firm (over $1600 into listed items) Local pick up only. Item is in Homewood, IL. May consider delivery to NW Indiana or south suburban Chicago.
I will toss in an extra 10-bolt 3.23 posi "organ donor" rear end (bad diff unit, leaking seals, worn bearings, 100K miles, aftermarket ring and pinion still good) on a full-price offer.
Possible horse trading:
- T56
- Ported / aftermarket heads for LS1
- Complete LSx car intake, harness, computer
- A paint job (for the car pictured in my footer)
- 17x9 or 18x9 wheels with 5" backspace
PM me if you're interested.
Last edited by 1981TA; 08-31-2012 at 11:47 PM.
08-29-2012, 09:14 PM
#4
part number on the diff is GM 12369497. The weld-on axle ends will take stock GM brake backing plates *if* you widen out the center hole to clear the Ford bearings - they retain the GM factory bolt positions.
Last edited by 1981TA; 08-29-2012 at 09:20 PM.
