408 LS Part Out - MAST HEADS!! and other parts
12-04-2012, 09:32 PM
#41
Category: Engine - Complete Motors
Price: $4000
Location (State): DE
Item Condition: Used
LS Engine?: Fits LS Engine
12-06-2012, 08:33 AM
#43
Still have:
1 Custom Nitrous Cam - hyd roller - $200
1 TSP TX Giant Cam $150
1 set of Diamond Nitrous Pistons w/wrist pins (No rings) for 4.030" bore - $300
1 pair of Katech Valve Covers w/ vac pump/breather fittings - $200
1 Edelbrock L92/LS3 Carb Intake (Port matched to Mast Heads) - $200
1 Edelbrock Victor 4150 Nitrous Plate system (no bottle)
1 Pair Mast Motorsports LS3 6 Bolt Medium Bore Heads
with Hollow Stainless Intake valves, inconel exhaust valve, 0.700" lift springs, and titanium retainers. Jesel Custom Shaft rocker arm system 1.7 ratio. - $3650 (heads alone were $3800)
12-11-2012, 01:50 PM
#48
TTT
Still have:
1 Custom Nitrous Cam - hyd roller - $200
1 set of Diamond Nitrous Pistons w/wrist pins (No rings) for 4.030" bore - $300
1 Edelbrock L92/LS3 Carb Intake (Port matched to Mast Heads) - $200
1 Edelbrock Victor 4150 Nitrous Plate system (no bottle)
1 Pair Mast Motorsports LS3 6 Bolt Medium Bore Heads
with Hollow Stainless Intake valves, inconel exhaust valve, 0.700" lift springs, and titanium retainers. Jesel Custom Shaft rocker arm system 1.7 ratio. - $3650 (heads alone were $3800
MAKE OFFERS!!!
Still have:
1 Custom Nitrous Cam - hyd roller - $200
1 set of Diamond Nitrous Pistons w/wrist pins (No rings) for 4.030" bore - $300
1 Edelbrock L92/LS3 Carb Intake (Port matched to Mast Heads) - $200
1 Edelbrock Victor 4150 Nitrous Plate system (no bottle)
1 Pair Mast Motorsports LS3 6 Bolt Medium Bore Heads
with Hollow Stainless Intake valves, inconel exhaust valve, 0.700" lift springs, and titanium retainers. Jesel Custom Shaft rocker arm system 1.7 ratio. - $3650 (heads alone were $3800
MAKE OFFERS!!!
12-22-2012, 12:09 PM
#50
I maybe interested in the heads. Question, will the mast heads work with standard LS3 rockers? and what are the combustion chamber size? Im looking for a set of heads to out perform my stock LS3 heads on a semi mild NA street build. If the heads would work with the stock rockers, PM me a price just for the heads, if you are willing to separate.
