Category: Engine - Complete Motors
Price: $3800
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): OH
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

deposit received for engine 4/10/13

Ls6 engine long block built for boost made over 750 rwhp in the z06 vette it was removed from. Cam was swapped after the dyno and actually made even more horse but wasn't dyno'd this was with a ysi supercharger on around 15 psi. I bought the engine from a board member VENOMIZED03 he can tell you all about it. I believe it was only around 2,000 mile put on the engine then he took it back to the engine builder when i bought it. He completely disassembled it installed new head gaskets and specked everything, It all still looked new inside, then reassembled it. Here is what I know about it.

Stock ls6 crank
Callie's rods arp 2000 bolts
Ross/Je pistons
Arp mains and head studs
Patriot stage 3 ls6 heads
Comp custom cam
Comp springs
Comp pushrods
Aftermarket timing set
8.8 compression
texas speed ported oil pump

$3800 plus shipping need to move this need cash bad. Prefer pickup but will ship if I have to. If I sell some other things I'll end up keeping it.

 

Bringing this up again. I am willing to take a 4 wheeler on partial trade if interested. Would like to have a Honda Recon or Rancher. Also would take sport bikes 300ex, 400ex, z400, any 450 on trade. thanks

 

Back up for an after Christmas sale

 

i am very intrested in your motor do you have any pics of the motor and is it a 24 or 58 wheel

 

It is 24x. I don't have any pictures the engine is wrapped in shrink wrap. I can assure you everything listed about the engine is in there and looks new.

 

where are you located at and do you have any paperwork on the motor from any dyno sheets

 

I'm about 60 miles east of Cincinnati Ohio 45660. VENOMIZED03 is the person I bought the engine from. It came from his z06 he sent me videos of the car running but I have lost them. If you contact him he may still have dyno sheets or paperwork. He even had his builder tear the engine down inspect and measure everything ailing with installing new head gaskets. Let me know if your interested for sure I have a guy wanting to trade but I would rather sell it for cash. Thanks

 

how much power can it handle?

 

Made an easy 800 to the tire with the previous owner on 15 lbs of boost. That's close to 1000 at the crank it will hold that no problem.

 

Bottom dollar shipped to a business in Shreveport LA. 71115

PM me, also do you have the blower setup?

 

well VENOMIZED03 Will be no help. just got done talking to him. he does not remember anything about this motor its been three years since he has owned it. what to do.

 

Well I sent him payment for the engine on 4-6-2011 so it hasn't even been two years. Funny he would say he dont remember it because he text me awhile back and asked how the engine was doing. I also text him when I posted the engine for sale asking if he knew anyone that would buy it. When he sold me his engine he built a 408 for his z06 he then traded it for a stock z06 and some cash. He had blown up the new z06 and was fixing it the last time I talked to him. If I can find his number I'll talk to him and see if he can post up and vouch for the engine.

I assure you it's what is listed If you were close it would be nice you could check it out. If I still have this later this year I will end up keeping it. The only reason I'm selling is due to my 3rd child on the way trying to live comfortable right now and not have thousands of dollars just sitting in the garage.
thanks,

 

Sorry I meant.he built it three years ago. He did remembered that it was 763 HP @18or20psi

 

ok so you know it's legit. He had a vortec ysi supercharger on it and was running 15lbs of boost to make those numbers with a stock ls6 cam. He then added the blower cam and played with the tune but never had it dyno'd He said it was most likely over 800rwhp due to the seat of the pants feel from the new cam. If you want to come look at it I'll unwrap it for you.
thanks,

 

do you have the YSI you would want to sell?

 

Trade for a 5.7 with 18k miles ans a fresh rebuilt 6.0?

 

I don't have the supercharger sorry

Are you saying a stock 5.7 and a stock 6.0? What all comes with them

 

Up for anyone getting a good tax return make your project awesome with this powerful little ls.

 

bump for someone that lives in BFE Ohio. I lived in peebles at one point.

 

That's cool how long ago? Maybe I know you