Looking for foxbody ls swap parts
12-03-2013, 10:42 PM
#1
Teching In
Thread Starter
iTrader: (12)
Join Date: Oct 2009
Location: TN
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Looking for foxbody ls swap parts Category: Accessories
Price: $1
Part Fits: 93-02 Chevrolet Camaro
Location (State): TN
Item Condition: Used
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Looking for:
k member
mounts
swap headers, preferably kooks but will look at others
crossmember
fuel systems (or advice on budget build)
motor 6.0 or ls1 or ls2
trans 4l60 or 4l80
thanks for all the help in advance guys, i will just order all the parts new if i dont get any response but i just thought i would check on here first thanks again.. 865-696-4712
12-04-2013, 08:01 PM
#3
if you're not looking for stainless, i've got a set of kooks 1 7/8" headers with 3 1/2" collectors...
https://ls1tech.com/forums/midwest-c...or-coated.html
also selling a full auto Jakes stage 3 4l80 (no trans brake) built to handle 1000+rwhp. under 1500 miles, installed by Speed Inc, $2300...$2400 shipped. No core needed, no waiting, should be out saturday if i don't have to work. if not, next chance will be the following weekend.
will also be selling my LME built LS1 347 with callies crank, K1 billet rods & diamond pistons at 9.5:1cr with the LME ported 241 heads making it 9.5:1cr. i don't have all the specs on the motor but will sell the complete long block with blower cam (have card) installed, arp head & main studs, (typical long block...valve covers to oil pan, front cover to rear cover, no accessories or sensors but a total take out deal can be made, complete with ls6 intake, holley rails, 80# injectors....even a D1sc blower setup.
Will let the base long block go for a no haggle price of $4000. shipping would be extra of course but i'll call it $150 to TN. btw, heads have stainless valves & double springs and were supposed to have a decent amount of port work done. once pulled will take plenty of pics. may sell as a short block too as i wouldn't mind keeping the heads.
going to be removing my aeromotive A2000 pump (low use, no street time, track only) for $250 + shipping. supports 2000hp, carb use only.
anyway, lmk if you're interested in anything.
Dave
https://ls1tech.com/forums/midwest-c...or-coated.html
also selling a full auto Jakes stage 3 4l80 (no trans brake) built to handle 1000+rwhp. under 1500 miles, installed by Speed Inc, $2300...$2400 shipped. No core needed, no waiting, should be out saturday if i don't have to work. if not, next chance will be the following weekend.
will also be selling my LME built LS1 347 with callies crank, K1 billet rods & diamond pistons at 9.5:1cr with the LME ported 241 heads making it 9.5:1cr. i don't have all the specs on the motor but will sell the complete long block with blower cam (have card) installed, arp head & main studs, (typical long block...valve covers to oil pan, front cover to rear cover, no accessories or sensors but a total take out deal can be made, complete with ls6 intake, holley rails, 80# injectors....even a D1sc blower setup.
Will let the base long block go for a no haggle price of $4000. shipping would be extra of course but i'll call it $150 to TN. btw, heads have stainless valves & double springs and were supposed to have a decent amount of port work done. once pulled will take plenty of pics. may sell as a short block too as i wouldn't mind keeping the heads.
going to be removing my aeromotive A2000 pump (low use, no street time, track only) for $250 + shipping. supports 2000hp, carb use only.
anyway, lmk if you're interested in anything.
Dave
12-04-2013, 09:37 PM
#4
Teching In
Thread Starter
iTrader: (12)
Join Date: Oct 2009
Location: TN
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for taking the time to type all that!! I just bought a motor about an hour ago complete intake to oil pan, ecu and wiring or I woulda def been interested in your set up.. i am gonna check out your headers and i may be interested in the trans but i have to make up my mind if i am going with a glide or not.. thanks for your time