Speartech Standalone LS Swap Harness and PCM
12-03-2014, 08:40 PM
#1
Teching In
Thread Starter
iTrader: (16)
Join Date: Mar 2012
Location: Raleigh, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Speartech Standalone LS Swap Harness and PCM Category: Accessories
Price: $475
Location (State): NC
Item Condition: Used
LS Engine?: Fits LS Engine
Also, selling the 9" rear from under the Nova complete with leaf springs, Lakewood bars, shocks etc. as well as the freshly built Muncie 4 speed trans and driveshaft. Rear will fit any 1968-1974 Nova as well as 1967 - 1969 1st gen Camaros. Was built by RCR (Richard Childress Racing) and is complete from drum to drum with 3.70 gears.
Any questions feel free to call.
336.339.6867
Thanks-
Rick
Last edited by JRMClassics; 12-04-2014 at 06:50 PM.
12-04-2014, 06:50 PM
#3
Teching In
Thread Starter
iTrader: (16)
Join Date: Mar 2012
Location: Raleigh, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Only wires cut when removed were trigger related wires that don't come with conectors on them anyways....fuel pump wire and fan wires. All other connectors are intact. I did realize when going back over the harness that it is actually a DBC harness as it has IAC and TPS connectors. For those needing a DBW harness then this will not work for you. I believe it is a reflashed blue/green DBW 1MB PCM which is what automatically made me just to post it as a DBW harness. Also....it has a 3 wire MAF, EV1 injectors plugs. It does not have any connectors to run an electronic controlled transmission. It is the equivalent of a 99-02 F-body LS1/T56 harness modified to run standalone with a better PCM.
