Howards Cam - 226/232, 115, 578/.587
#1
Howards Cam - 226/232, 115, 578/.587
Category: Accessories
Price: $250
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): WA
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
http://www.summitracing.com/parts/hr...make/chevrolet
Worked really well with SLP 1.85 rockers, which I'm also selling! https://ls1tech.com/forums/parts-cla...5-rockers.html
Last edited by 1970camaroRS; 02-25-2015 at 07:35 PM.
#3
Never got it on a dyno, just street tuned it with a wideband. 105% duty cycle with 32lb injectors, so you can make guesses from there. Never got this setup on track either, but I beat a lightly modded 2012 SS Camaro by a few cars on the street once. It was in a 6.0L with PRC 5.3L stage 2.5 heads, stock truck intake and 1-3/4 pacesetters. Power was smooth and significant...
Also, this was with the SLP 1.85 rockers. Combo pulled hard all the way to 7,000rpm. I'm selling the rockers too: https://ls1tech.com/forums/parts-cla...5-rockers.html
Also, this was with the SLP 1.85 rockers. Combo pulled hard all the way to 7,000rpm. I'm selling the rockers too: https://ls1tech.com/forums/parts-cla...5-rockers.html
Last edited by 1970camaroRS; 02-25-2015 at 07:36 PM.
#4
On The Tree
iTrader: (9)
Join Date: Aug 2008
Location: NW Ohio
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Interested in the cam, not sure how it would work with my set up. If anyone else can chime in, Please do.
1998 WS6
Fresh stock Bottomend
GM Hot cam now
799 Heads PRC Springs
Stock rockers/Turion Upgrade
LS7 Lifters
7.4 Hardend Pushrods
LS6 Intake
Ported TB
1 3/4 Headers
SLP Lid
Catless OR Pipe
Magnaflow Exhaust
6 Speed/New Clutch
3.42 10Bolt.
Any Vids with this cam?
1998 WS6
Fresh stock Bottomend
GM Hot cam now
799 Heads PRC Springs
Stock rockers/Turion Upgrade
LS7 Lifters
7.4 Hardend Pushrods
LS6 Intake
Ported TB
1 3/4 Headers
SLP Lid
Catless OR Pipe
Magnaflow Exhaust
6 Speed/New Clutch
3.42 10Bolt.
Any Vids with this cam?
#5
Yeah, it should work well with your setup. No WOT vids, but a drive and idle vid here:
Untuned from last spring:
Drive-by, also untuned:
https://www.youtube.com/watch?v=cANNT_X6fSY#t=50
Untuned from last spring:
Drive-by, also untuned:
https://www.youtube.com/watch?v=cANNT_X6fSY#t=50