Edelbrock Cam and LS6 Valve Springs
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Arizona
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock Cam and LS6 Valve Springs
Category: Engine - Intake/Fuel
Price: $200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO
Location (State): AZ
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
Swapped to a different setup so cam and springs are going. Cam has been used for about 3k miles. I bought the cam new. Not sure how many miles are on the springs, but they checked out when I had the heads went through about 3k miles ago.
Specs on the cam:
Duration: 230/237
Lift: .540/.540
LSA: 110 deg
http://www.summitracing.com/parts/edl-2216/overview/
Edelbrock used to advertise this cam as an LS carb swap cam. I used with both a carb'd and injected LS and it ran great.
I ran this cam and springs in an LQ4 with 243 heads, long tubes, and an Edlebrock dual plane carb intake with a Holley 750 carb. Without a professional tune it made 372hp/ 378tq at the tires through an unlocked A4 tranny. This is a very streetable cam with good low end torque. The numbers "390500" are stamped on the end of the cam, not sure what this means.
$200 +$20 shipping to anywhere in the lower 48 for the cam and springs. Not looking to seperate unless you want just the springs.