[SOLD] TrickFlow 220 Fast as Cast Heads, Dual Springs & Yella Terra 1.7 rockers
#1
[SOLD] TrickFlow 220 Fast as Cast Heads, Dual Springs & Yella Terra 1.7 rockers
Category: Engine - Power Adders
Price: $0
Location (State): SC
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Manufacturer info: http://www.trickflow.com/parts/tfs-30610002
I think I paid $1800 for the heads new plus a little over $500 for the rockers. Selling for $1500 shipped in the continental U.S. I'll sell the heads and rockers separately if you'd like ($1250 heads, $300 rockers)
Two of the header bolt holes may eventually need to be helicoiled but everything seals up fine. (The two bolt holes don't need a helicoil right now. I had some bolts in them that were a little too short and they won't tighten any more but I put ARP header studs in there (the right length) and they tighten fine.)
Last edited by jclayc; 11-29-2015 at 10:01 PM.
#3
They're the 65cc ones (http://www.trickflow.com/parts/tfs-30610002). No work done on them other than dual springs to support the higher lift of the cam I had with them (was running a Comp Cam 229/239 .627"/.621" 111.5+3)
Data sheet says (I'll go verify)
Intake Valve Diameter (in):2.055 in.
Exhaust Valve Diameter (in):1.570 in.
Data sheet says (I'll go verify)
Intake Valve Diameter (in):2.055 in.
Exhaust Valve Diameter (in):1.570 in.
#5
I'm no expert, but the LS1HowTo on installing YellaTerra 1.7 rockers do it to a stock LS1... so I'd say yes.
Trending Topics
#9
nothing to "beware", it's simple
He messaged me first: http://imgur.com/871OVsr
He said he wanted them first: http://imgur.com/74wQde8
He paid first, before I could respond to you telling you he took them: http://imgur.com/RjnQuSl
I apologize for any confusion but I never told you they were yours. I've even offered to pay you back paypal's fee
He messaged me first: http://imgur.com/871OVsr
He said he wanted them first: http://imgur.com/74wQde8
He paid first, before I could respond to you telling you he took them: http://imgur.com/RjnQuSl
I apologize for any confusion but I never told you they were yours. I've even offered to pay you back paypal's fee
Last edited by jclayc; 11-29-2015 at 10:42 PM.