Holley HP EFI 550-602 and Aux harness 558-400
#1
Holley HP EFI 550-602 and Aux harness 558-400
Category: Engine - Electrical
Price: $1350
Location (State): TN
Item Condition: Used
LS Engine?: Fits LS Engine
Selling my Holley HP EFI kit, works fine and all that I just want to go DBW and don't feel like buying another PC laptop to use on it (old laptop with my files on it took a dump).
I originally had this running an LS1, but it's currently hooked to a 24x L92 with AFM/VVT/etc delete and LS3 intake/injectors. This will run 24x or 58x motors, and with cheap extensions works with front cam sensors and side mounted knock sensors.
I haven't hacked it up or cut it and most of the labels are still on the wires. If you've seen my build thread you know there aren't a ton of miles on this, a few thousand or so I'd guess.
*Full disclosure* - the wire bundle going down to the wideband (which is included) got too close to a header and melted some of the black outer covering onto the wires inside. The wires inside are fine, but I went of my way to peel the black back and make it look as bad as possible in the pics. Some heat-shrink or tape would fix it, but I don't want anyone to think I'm hiding anything.
Anyway, no issues with this setup, it's in the car and tuned for a 6.2 with a mild cam and headers, you can download other basic tunes from Holley, assuming you don't use a Mac of course.
If it doesn't sell I'll just keep using it, there are worse things in life than having a running car.
I also have a Fast 92 TB I could throw in for $300
Last edited by chuckd71; 06-27-2016 at 03:01 PM.