CCW Classics for C5 and Fbody 4th Gen
#1
CCW Classics for C5 and Fbody 4th Gen
Im selling a set of Classics that will fit a 4th gen fbody and C5.
Wheels have gloss silver metallic lips and fine textured black centers. One rear has two nicks on the edge of the rim and has a few specs in the powder the rest are nice. Front barrels are brand new. Hardware is brand new rest of the parts are used.
Specs are as follows
17x10.5 /2" lip and 8.5" barrel / 7 3/4" BS
17x11.5 /2.5" lip and 9" barrel/ 8 1/4" BS
Asking $1800 shipped in the US or if you are in Houston pick them up for $1700.
Some of the pics show the fitment on the fbody you have a little over a 1/4" gap between the edge of the rim and the spindle. This was with the suspension hanging down im sure with the wheels on the ground the space will get even bigger.
On a C5 the fronts are flush with the fender edge. On the rear they sit it a little past the fender not even a half inch. With the suspension at full compression Im sure the rear wheel will be even closer to being flush with the rear quarter panel edge.
Wheels have gloss silver metallic lips and fine textured black centers. One rear has two nicks on the edge of the rim and has a few specs in the powder the rest are nice. Front barrels are brand new. Hardware is brand new rest of the parts are used.
Specs are as follows
17x10.5 /2" lip and 8.5" barrel / 7 3/4" BS
17x11.5 /2.5" lip and 9" barrel/ 8 1/4" BS
Asking $1800 shipped in the US or if you are in Houston pick them up for $1700.
Some of the pics show the fitment on the fbody you have a little over a 1/4" gap between the edge of the rim and the spindle. This was with the suspension hanging down im sure with the wheels on the ground the space will get even bigger.
On a C5 the fronts are flush with the fender edge. On the rear they sit it a little past the fender not even a half inch. With the suspension at full compression Im sure the rear wheel will be even closer to being flush with the rear quarter panel edge.