The Spec MFGR image


Unused Spec Friction ring


Undamaged as-new Pressure Plate etc.


Unused.


Never engaged Spec 3+ disk surface.


GM hardware.


Same Clean, unused disk which came with my Spec Assy


SC75A Spec Aluminum Flywheel. I just weighed it = 12.5lbs


AS-was new in box. Not dropped, undamaged, etc.


Spec markings.


Never used Flywheel friction surface.


I never got a chance to see how great this disk felt nor held power... my loss, your gain now
All,
For sale and immediate shipping is:
As-New Spec 3+ Clutch Assy
As-New Spec SC75A Aluminum Flywheel
As-new OE Hydraulic Throw-Out bearing
New ARP hardware to mount all of this up!
Retail = ~$1100
Good Sale Price = $750.
I’ll of course ensure Clutch Assy is very well protected with paper and bubble wrap for shipping.

These parts were purchased Years back when my BMW/LS2-3 project was evolving - years of delay = Spec parts Stayed in box... then all was installed as project completed - then project sat unstarted for more time - eventually got new build started... with only 5 engine starts in garage a failed O-ring under oil pump cause catastrophic engine seize at idle upon 5th start. This Spec Clutch assy set up will not be used with the next motor and a turn in project direction.

Please understand these parts have ONLY been used as described above. I’d not attempt to sell these parts if even lightly used - pics will display the newness. Please make timely buying decision so I can put funds towards a less streetable set up which costs much more than my Spec parts cost :-(

Thank you for looking - and/or forwarding this listing to a buddy who could genuinely use a good deal on really good parts!!!

Parts details as per mfgr wording:

The flagship stage for a high powered street or race car that requires a manageable and friendly engagement, the stage 3+ features a carbon semi-metallic full faced material that offers unparalleled life, friction co-efficient and drivability characteristics in one single package. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Great for street, drag, drift, autocross, road racing, pulling, rallye and drift.

• High clamp pressure plate
• Carbon semi-metallic friction material
• High torque sprung hub and disc assembly

to the top for a fresh look at a solid deal on great parts —->

Yes... all together and ready for sale / shipment / your use and enjoyment!!!


My ship-from zip code is 73003. I’m sure after I pkg well, this will be a 50lb box with all parts/packaging/etc.



Proper ARP pressure plate bolt kit


Proper OE hydraulic throw out bearing



Proper Flywheel ARP bolts
Additional new items I should sell with my clutch combo - Yes, the price ought to go up... we all know the prices of these parts - And Yes, I’ll not expect full value:

OE bolts plus new ARP fastening plus OE SKF hydraulic throw-out bearing - no hydraulic lines in box... as you’ll want to use yours given your locations.


All here


Clean and parts in separate baggies zip-locked !!!


Layers of thick cardboard plus packaging paper etc.
Folks

Continued evolution of my parts for sale ... and now with my 45 min packing effort

I have received a few private messages with offers to buy - and I’ve responded... but got no communication after that - if this was in error, please try again to message me!!!

With my over-packing practices, the combo of parts appears to weigh 48-49lbs... and Yes, I’ll make it my responsibility to incur shipping cost and ensure the items get to you in same condition I have them in now!!! PayPal ready —> 👍🏻

shippers ready to ship - ttt...!

3 offers, I’ve responded to all 3... but then zero reply from there -
Offer 1 = $500 shipped.
Offer 2 = $700 shipped.
Offer 3 = $600 shipped.

I just need a reply from my reply to an offer Gents!!!

Sold to happy buyer.
$700 shipped.
End.