mairen25

iTrader: (1)

hey guys i want to run on e85 and i'm looking for the correct injectors and an converter box to high impedance.thanks

spaz1

iTrader: (9)

http://www.racetronix.com/INJL120.html
http://www.racetronix.com/RX-ICH.html

mairen25

iTrader: (1)

can i use this with stock pcm or need to buy another computer

Bmotorsports

Here are our Delphi 120lb injectors:
http://www.bmotorsports.com/shop/pro...oducts_id/1601

Here are our Bosch 160lb injectors:
http://www.bmotorsports.com/shop/pro...roducts_id/562

Here are our Siemens 220lb injectors:
http://www.bmotorsports.com/shop/pro...oducts_id/1588

Here is the external electronic box you need to run these Low impedance injectors (your PCM can only handle high impedance):
http://www.bmotorsports.com/shop/pro...roducts_id/805

If you try to run these injectors with the stock PCM with no modifications, you may damage your PCM. Some people put resistors inline with these injectors to run them but I strongly recommend against this practice as the result is a slower opening, poor performing injector. If you use the AEM injector driver you will be in great shape.

kcmags

iTrader: (5)

Will a Accell Gen 7 run those without the extra box???

Bmotorsports

Yes, the Accel DFI Gen7 system has the ability (drivers) to control high or low impedance injectors directly (without the extra box). Many aftermarket systems have low impedance drivers, especially those geared towards the domestic high horsepower market.

Bmotorsports

As an update to the original post, we are now also offering the Delphi 120lb/hr high flow low impedance injectors:

http://www.bmotorsports.com/shop/pro...oducts_id/1601