LS1 oilpan, ls6 intake, pulley sys, and ls1 waterpump
10-13-2009, 11:11 PM
#1
Teching In
Thread Starter
Join Date: Mar 2007
Location: The Deep South
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
LS1 oilpan, ls6 intake, pulley sys, and ls1 waterpump Swapping an LQ4 into 3rd gen Camaro.
Need the following:
- LS1 oil pan with pick-up tube and oil pump
- LS1/6 intake w/ mech. TB also fuel rail and injectors
- LS1 accessory drive (pulley system)
- LS1 waterpump (if not included w/ pulley system)
pictures please.......
Really dont want to buy these in pieces, so if anybody has them together.
PM please
Need the following:
- LS1 oil pan with pick-up tube and oil pump
- LS1/6 intake w/ mech. TB also fuel rail and injectors
- LS1 accessory drive (pulley system)
- LS1 waterpump (if not included w/ pulley system)
pictures please.......
Really dont want to buy these in pieces, so if anybody has them together.
PM please
10-14-2009, 05:32 AM
#2
Staging Lane
iTrader: (11)
Join Date: Jul 2008
Location: Kansas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I have a factory water pump, still works great but has about 120,000 miles on it. I'd reuse it but I am going after market. I also have a factory oil pan from an f-body. Only problem with oil pan is it had been repaired on the bottom from the guy I bought the car from. it had apparently got crushed on a curb or something cause it cracked it....so he welded it/ patched it. Works great, just not as pretty as new. I'd almost give these to you if you can use em......let me know and we can work out a deal.
