WTB, built LS trans. 4L80, TH400
#1
TECH Regular
Thread Starter
iTrader: (3)
Join Date: May 2008
Location: DFW
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
WTB, built LS trans. 4L80, TH400
Trying to pick up a built auto to put behind a Turbo/LSA
4L80 or TH400 are both options, let me know what you have. Full manual VB is a bonus on both
4L80 or TH400 are both options, let me know what you have. Full manual VB is a bonus on both
#2
TECH Regular
iTrader: (9)
Join Date: Dec 2007
Location: Ohio
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
I have a 4l80e out of a 07 2500 van. It was just rebuilt with alto red clutchs and a CK transbrake and full manual valve body. I also have a brand new FTI 4600 nitrous stall too. $1000 for the tans and $600 for the convertor.
Last edited by 1badeagle; 02-09-2013 at 03:31 AM.
#4
On The Tree
iTrader: (9)
Join Date: Sep 2012
Location: Rio Rancho, NM
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I have a Turbo 400 complete setup for an Fbody. Trans is built by JW transmissions here in Rockledge Florida with a manual valve body and all the trick **** they are known for with a bad *** trans brake.
http://www.racewithjw.com/index.php
http://www.racewithjw.com/catalog.php
3800 stall 10 inch converter built with steel band.
Also got a nice Dennys Nitros driveshaft with 1350 ujoints and a nice B&M shifter, Pro Stick.
http://www.dennysdriveshaft.com/c1_n...iveshafts.html
http://www.summitracing.com/parts/bmm-80706/overview/
BMR turbo 400 trans crossmember with torque arm relocation.
http://www.bmrsuspension.com/?page=p...&productid=331
Setup has a few hundred miles on it with a new filter and ujoints.
Also has the sweet TCI 399754 flexplate
http://www.summitracing.com/parts/tc...make/chevrolet
Also has ARP flexplate bolts.
looking for 2500 or swap for a built T56 setup with steel shift forks, carbon blocker rings and viper output shaft (shifter, bellhousing, driveshaft).
thanks
Rich
http://www.racewithjw.com/index.php
http://www.racewithjw.com/catalog.php
3800 stall 10 inch converter built with steel band.
Also got a nice Dennys Nitros driveshaft with 1350 ujoints and a nice B&M shifter, Pro Stick.
http://www.dennysdriveshaft.com/c1_n...iveshafts.html
http://www.summitracing.com/parts/bmm-80706/overview/
BMR turbo 400 trans crossmember with torque arm relocation.
http://www.bmrsuspension.com/?page=p...&productid=331
Setup has a few hundred miles on it with a new filter and ujoints.
Also has the sweet TCI 399754 flexplate
http://www.summitracing.com/parts/tc...make/chevrolet
Also has ARP flexplate bolts.
looking for 2500 or swap for a built T56 setup with steel shift forks, carbon blocker rings and viper output shaft (shifter, bellhousing, driveshaft).
thanks
Rich