WTB: Front accessories, Crankshaft, Large Frame Turbo
05-15-2013, 02:27 PM
#1
WTB: Front accessories, Crankshaft, Large Frame Turbo Looking for front accessory drive setup, not really sure if I want camaro, f-body or corvette stuff but shoot me a line if oyu have a complete setup. I need the crank pulley, power steering pump with bracket, alternator with bracket, and tensioner with bracket, and water pump.
Looking for a decent condition stock crankshaft for the 3rd Gen LSx with the 24 tooth reluctor wheel on it. Will be installed in a LS1 block.
Large frame turbo, preferred T4 turbine, in the 1.00A/R area, 74mm+ on compressor inducer.
Text is preferred: 970-402-6118 -John
Can email @ roastin944turbo@yahoo.com as well. Thanks
Looking for a decent condition stock crankshaft for the 3rd Gen LSx with the 24 tooth reluctor wheel on it. Will be installed in a LS1 block.
Large frame turbo, preferred T4 turbine, in the 1.00A/R area, 74mm+ on compressor inducer.
Text is preferred: 970-402-6118 -John
Can email @ roastin944turbo@yahoo.com as well. Thanks
06-01-2013, 02:27 AM
#4
BUMP
I have a car waterpump now. I am still looking for:
Stock Crankshaft (Dont mind turning it if necessary)
Corvette or F-Body Crank Pulley, Alternator, PS Pump with reservoir, brackets and hardware for both, tensioner that bolts to the waterpump and idler pulley (I think there is one of these right?)
Large Frame Turbo
I have a car waterpump now. I am still looking for:
Stock Crankshaft (Dont mind turning it if necessary)
Corvette or F-Body Crank Pulley, Alternator, PS Pump with reservoir, brackets and hardware for both, tensioner that bolts to the waterpump and idler pulley (I think there is one of these right?)
Large Frame Turbo
)