WTB Bare 6.0 block
#1
WTB Bare 6.0 block
I am looking for a stock bore 6.0 block or a block that will clean up to a 4.010 bore. Iron or Al doesnt matter. I am in the San Deigo/LA area. I would like to find something in the San Diego / LA area. However, I would do shipping if the price was right.
!!!WITH THE MAIN CAPS!!!
!!!WITH THE MAIN CAPS!!!
#7
How bout you see me in THE MACHINE SHOP, using a SUNNEN Hone to achieve a 4.010 bore (plus of course the correct expansion clearances for a forged piston that was cryogenically treated and coated) .... I know its CRAAAAZY right! Then again if I REEEALLLY wanted to I could use my SUNNEN micrometer hone with a drill to hone the block to !!!!!4.010!!!! Of course with the correct torque plate.
Yeeeessaa maaasssta me knowwss how ta machineeess partsa too......
BTW: CK10?.............nice name drop. If there werent ....ohhh about 10 different other machines more than capable of achieving the proper dimension, cross hatch, and surface finish.
BTOW: It doesnt matter what the machine is, a shitty machinest with a !!!!! SUNNEN CK10 POWER STROKE !!!!! vs. a skilled machinest with a old school hone and a clue... the skilled machinest wins everytime!
Yeeeessaa maaasssta me knowwss how ta machineeess partsa too......
BTW: CK10?.............nice name drop. If there werent ....ohhh about 10 different other machines more than capable of achieving the proper dimension, cross hatch, and surface finish.
BTOW: It doesnt matter what the machine is, a shitty machinest with a !!!!! SUNNEN CK10 POWER STROKE !!!!! vs. a skilled machinest with a old school hone and a clue... the skilled machinest wins everytime!
Last edited by SShep71; 08-13-2013 at 12:36 PM.
Trending Topics
#9
I have a bare block. I had a lifter go bad and take a small chunk out of the lifter bore. I was going to have it machined, but I stepped up to a LS3.
Block is an aluminum L76 out of a 09 G8. Make me an offer, I'll let it go for cheap.
Block is an aluminum L76 out of a 09 G8. Make me an offer, I'll let it go for cheap.
#12
Not sure if you are interested. Doing this for my bro. Please see link below. Thanks for looking.
https://ls1tech.com/forums/showthrea...post&t=1675813
https://ls1tech.com/forums/showthrea...post&t=1675813