misc. bolts, sensors, valve covers, coils etc.
01-26-2014 | 03:26 PM
#1
Thread Starter
Teching In
Joined: Mar 2009
Posts: 2
Likes: 0
From: overseas
misc. bolts, sensors, valve covers, coils etc. Hello, I just got a free LS1 in exchange for work, but we had to strip a lot of parts from it for the new LS2 that went into my friends car. Basically I need the following:
1.
2.
3. F-body front accessory brackets for alternator with bolts
4.
5.
6. every sensor for the engine and throttle body with bolts
7.
8.
9.
10. bellhousing bolts (lets just say every single bolt except head and intake, I need)
11. oil filter adapter (piece oil filter screws onto). block off port above oil filter with bolts.
12.
13. Oil dipstick and tube
I'd like to just buy everything from one source, let me know if you have everything.
I'm on a military post in Germany, so it is a US address to ship to.
-Ken.
1.
2.
3. F-body front accessory brackets for alternator with bolts
4.
5.
6. every sensor for the engine and throttle body with bolts
7.
8.
9.
10. bellhousing bolts (lets just say every single bolt except head and intake, I need)
11. oil filter adapter (piece oil filter screws onto). block off port above oil filter with bolts.
12.
13. Oil dipstick and tube
I'd like to just buy everything from one source, let me know if you have everything.
I'm on a military post in Germany, so it is a US address to ship to.
-Ken.
Last edited by mcgarnicle; 08-18-2014 at 06:01 AM. Reason: list update
Trending Topics
06-30-2014 | 08:29 AM
#9
Thread Starter
Teching In
Joined: Mar 2009
Posts: 2
Likes: 0
From: overseas
07-01-2014 | 02:18 PM
#10
Staging Lane
Joined: Apr 2008
Posts: 57
Likes: 0
From: dfw
I have a LS double key fluid harmonic balancer, LS water pump, LS high volume milling oil pump, LS idler tensioner pulley. Msd coils with the rails and all wires ect. LS oil pan kit w windage tray, dipstick, and pick up tube,ls3 Tb. ARP head bolts, comp push rods.LS exhaust manifolds. All new or with less than 400 miles. Let me know if you need any of this.
Last edited by texashavoc; 07-01-2014 at 02:28 PM.
07-10-2014 | 10:56 AM
#13
Thread Starter
Teching In
Joined: Mar 2009
Posts: 2
Likes: 0
From: overseas
I have a LS double key fluid harmonic balancer, LS water pump, LS high volume milling oil pump, LS idler tensioner pulley. Msd coils with the rails and all wires ect. LS oil pan kit w windage tray, dipstick, and pick up tube,ls3 Tb. ARP head bolts, comp push rods.LS exhaust manifolds. All new or with less than 400 miles. Let me know if you need any of this.
