WTB- Third Gen F-body Swap Parts
02-14-2017, 12:04 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Sep 2016
Location: Hudsonville, MI
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
WTB- Third Gen F-body Swap Parts Hey all, I have a 5.3 going in to a third gen F-body. I'm in need of a few things. Here's the list.
4th gen F-body oil pan, windage, dip stick and tube
LS1 or LS6 intake
Valve springs - beehive or dual, .600 lift or more, I'm a little iffy on used springs but will consider them
Camshaft - Currently thinking something like 224/224 112, I would consider anything around there.
Lifters - I was thinking GMPP or similar, something upgraded over stock OE lifters
Rockers - Looking for stock ratio preferably with upgraded trunions.
Push rods - Not sure what length I will actually need. Maybe you guys know and have some?
This will be a moderate build, looking to make it fun and reliable to drive. Let me know if you have anything and how much $ please. Thanks
4th gen F-body oil pan, windage, dip stick and tube
LS1 or LS6 intake
Valve springs - beehive or dual, .600 lift or more, I'm a little iffy on used springs but will consider them
Camshaft - Currently thinking something like 224/224 112, I would consider anything around there.
Lifters - I was thinking GMPP or similar, something upgraded over stock OE lifters
Rockers - Looking for stock ratio preferably with upgraded trunions.
Push rods - Not sure what length I will actually need. Maybe you guys know and have some?
This will be a moderate build, looking to make it fun and reliable to drive. Let me know if you have anything and how much $ please. Thanks
Last edited by Craigtom86; 02-15-2017 at 09:05 PM.
