WTB LS1 ceramic coated headers
#2
TECH Fanatic
iTrader: (17)
I have a set of used Grotyohann long tubes. They are the original grotyohanns with 1-7/8" primaries. Previous owner had this to say..
"Headers are the original Grotyohann. They're the real deal. I think Quicktime bought the rights to them after Roger went out of business. 1 7/8" Coated inside and out if I recall correctly. Custom made Y-Pipe 3" into flowmaster collector into 3.5" I-pipe. BTW, The grots used a 2 bolt hook-up instead of a 3 bolt for Y-Pipe."
The drivers side has some decent sized dimples in the first tube to clear the steering on the camaro. Shouldnt hurt the functionality at all...almost every header Ive owned had to be dimpled atleast alittle. The y-pipe has the same thing going on. Alittle rusty, and a few scrapes from bottoming out. No holes at all. It has a 3" cutout welded in as well. I was told the headers were coated inside and out...but they have that crusty rust down towards the collectors. I see it on a lot of headers. Here are the pics. Now...Im not really sure what these suckers are worth in the condition that they are in. Ide like to get around $500 for the headers and the y-pipe. Let me know if you are interested and the price is negotiable. I was hoping for them to be picked up..but I guess I can ship if needed. Let me know..
Justin
"Headers are the original Grotyohann. They're the real deal. I think Quicktime bought the rights to them after Roger went out of business. 1 7/8" Coated inside and out if I recall correctly. Custom made Y-Pipe 3" into flowmaster collector into 3.5" I-pipe. BTW, The grots used a 2 bolt hook-up instead of a 3 bolt for Y-Pipe."
The drivers side has some decent sized dimples in the first tube to clear the steering on the camaro. Shouldnt hurt the functionality at all...almost every header Ive owned had to be dimpled atleast alittle. The y-pipe has the same thing going on. Alittle rusty, and a few scrapes from bottoming out. No holes at all. It has a 3" cutout welded in as well. I was told the headers were coated inside and out...but they have that crusty rust down towards the collectors. I see it on a lot of headers. Here are the pics. Now...Im not really sure what these suckers are worth in the condition that they are in. Ide like to get around $500 for the headers and the y-pipe. Let me know if you are interested and the price is negotiable. I was hoping for them to be picked up..but I guess I can ship if needed. Let me know..
Justin
#3
On The Tree
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Location: AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I don't know how much those were new but that seems pretty steep to me, since I can get coated Pacesetters and ORY for $480 brand new on speed-eng.com....I wasn't looking to spend that much on used ones anyways.
#4
TECH Fanatic
iTrader: (17)
Haha...I have no idea how much they are worth honestly. I heard they were good and they were pricey when new. And its a custom y-pipe so I just threw a number out there. If you dont find something else, shoot me a PM with an offer no matter how low and we'll talk. You'll have to forgive me...I just obtained an LS1 doner car not too long ago, so Im still picking up on the LS1 parts and accesories and what they go for. Hope you find somethin good!
Justin
Justin
Trending Topics
#10
Teching In
iTrader: (1)
Join Date: May 2005
Location: Kansas City, MO
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
I have some Pacesetter ceramic-coated LTs I just took off my '02 TA this weekend. I also have a 3" ORY to go with it. All the parts have less than 4k miles on them. If you'd be able to get up to KC MO (or meet me somewhere between) I'd let it all go for $400. I should be able to get some pics up by tomorrow evening, at the latest. Let me know; PM if interested.
Jason
Jason
#11
On The Tree
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Location: AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Jason I might be interested, please email me some pics when you get some. I would like to get them a little cheaper than that though if we meet somewhere in the middle since with the gas money I'd use to drive up there I could almost buy a new set...
#12
Teching In
iTrader: (1)
Join Date: May 2005
Location: Kansas City, MO
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
I have some pictures up, here's the link:
http://s75.photobucket.com/albums/i282/Jason482/
Let me know if you have any problem getting to them...
Feel free to email me: My Username @gmail.com, we can discuss price/when to meet.
Thanks!
Jason
http://s75.photobucket.com/albums/i282/Jason482/
Let me know if you have any problem getting to them...
Feel free to email me: My Username @gmail.com, we can discuss price/when to meet.
Thanks!
Jason