for sale ford 9" 383 stroker, for sale also 9sec camaro part out for sale
07-13-2007, 05:52 PM
#1
Teching In
Thread Starter
iTrader: (12)
Join Date: Jan 2007
Location: nw indiana
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
for sale ford 9" 383 stroker, for sale also 9sec camaro part out for sale ford 9" 383 stroker, for sale also 9sec camaro part out
NO REASONABLE OFFER REFUSED
moser 9" outa 1996 camaro stock length
35 spline gun drilled axels with star flanged ends, 1/2 wheel studs
alumin center section
steel spool
3:70 street gear
extra fill hole for easy filling (fluid)
moser 1350 yoke end
has BMR brackets already welded on for anti roll/sway bar
i have around 3200 in this 9" i am asking 2700 OBO gets no stronger
this was in my 9sec street car has around 2k on it and is like new
383 stroker
eagle 4340 forged crank
howard splayed caps 4bolt mains
ARP studs through out (heads had bolts not studs)
10:1 SRP pisted forged
file fit rings
eagle H-beam forged rods
clevit bearsing through out
cannon 7qt oil pan
high volum oil pump
at idel car had around 60pounds oil press
i'm not sure on miles for the short block but not very many oil was change every track day a very little street driven so i would say around 500 being on the high side.
my car was stock weight and went 9.9x at 136 on a 175 stock with stock heads (ported) with a cc306 cam on pump gas this short block can handle a lot more nitrous 300shot no problem
i have a few guys interested in the short block but the asking price is 3k
ALL PARTS LOCATED IN LAKE STATION INDIANA LOCAL PICK WOULD BE AWSOME AND WILL MEET HALF WAY OR DELIEVER FOR THE RIGHT SALE
NO REASONABLE OFFER REFUSED
moser 9" outa 1996 camaro stock length
35 spline gun drilled axels with star flanged ends, 1/2 wheel studs
alumin center section
steel spool
3:70 street gear
extra fill hole for easy filling (fluid)
moser 1350 yoke end
has BMR brackets already welded on for anti roll/sway bar
i have around 3200 in this 9" i am asking 2700 OBO gets no stronger
this was in my 9sec street car has around 2k on it and is like new
383 stroker
eagle 4340 forged crank
howard splayed caps 4bolt mains
ARP studs through out (heads had bolts not studs)
10:1 SRP pisted forged
file fit rings
eagle H-beam forged rods
clevit bearsing through out
cannon 7qt oil pan
high volum oil pump
at idel car had around 60pounds oil press
i'm not sure on miles for the short block but not very many oil was change every track day a very little street driven so i would say around 500 being on the high side.
my car was stock weight and went 9.9x at 136 on a 175 stock with stock heads (ported) with a cc306 cam on pump gas this short block can handle a lot more nitrous 300shot no problem
i have a few guys interested in the short block but the asking price is 3k
ALL PARTS LOCATED IN LAKE STATION INDIANA LOCAL PICK WOULD BE AWSOME AND WILL MEET HALF WAY OR DELIEVER FOR THE RIGHT SALE
