WTB rear cam cover & harness connectors
09-16-2007, 12:27 AM
#1
Staging Lane
Thread Starter
iTrader: (8)
Join Date: Sep 2006
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
WTB rear cam cover & harness connectors I need the little grey cover that goes directly behind the cam. It sits behind the rear engine cover.
Also, I need F Body harness connectors, the chassis side of C100, C101, C105, C220, & C230. I need the connector with about 6" of the wires hanging off it.
C100...black 10 pin connector. Has more wires than this, but includes:
............A- pink (bank 1 ign/inj switched 12v 15amp power in)
............G- pink (transmission/EVAP switched 12v 15amp power in)
............J- dk green (cooling fan 1 relay control out)
C101...grey 10 pin connector.
............B- pink (bank 2 ign/inj switched 12v 15amp power in)
............D- dk green w/ white stripe (fuel pump relay control out)
............E- pink w/ black stripe (switched 12v 15amp power for PCM in)
............G- orange (constant power for PCM 12v 50amp power in)
............H- black w/ white stripe (ground in)
C105...black 8 pin connector.
............B- pink (trans/stop lamp/heated o2/MAF 12v 20amp power in)
............G- white (tach signal out)
These are behind the firewall, in the passenger compartment
C220...natural color 10 pin connector.
............E- black w/ white stripe (ground in)
............G- brown (back-up lite switch switched 12v power in)
............H- lt green (back-up lite switch out to lites)
............K- dk green w/ white stripe (VSS signal 4000ppm out)
C230...blue 10 pin connector.
............B- brown (MIL "malfunction indicator lamp" feed)
............E- dark blue (VATS fuel enable input)
............K- dk green (serial data class 2 out OBD-II connector)
Also, I need F Body harness connectors, the chassis side of C100, C101, C105, C220, & C230. I need the connector with about 6" of the wires hanging off it.
C100...black 10 pin connector. Has more wires than this, but includes:
............A- pink (bank 1 ign/inj switched 12v 15amp power in)
............G- pink (transmission/EVAP switched 12v 15amp power in)
............J- dk green (cooling fan 1 relay control out)
C101...grey 10 pin connector.
............B- pink (bank 2 ign/inj switched 12v 15amp power in)
............D- dk green w/ white stripe (fuel pump relay control out)
............E- pink w/ black stripe (switched 12v 15amp power for PCM in)
............G- orange (constant power for PCM 12v 50amp power in)
............H- black w/ white stripe (ground in)
C105...black 8 pin connector.
............B- pink (trans/stop lamp/heated o2/MAF 12v 20amp power in)
............G- white (tach signal out)
These are behind the firewall, in the passenger compartment
C220...natural color 10 pin connector.
............E- black w/ white stripe (ground in)
............G- brown (back-up lite switch switched 12v power in)
............H- lt green (back-up lite switch out to lites)
............K- dk green w/ white stripe (VSS signal 4000ppm out)
C230...blue 10 pin connector.
............B- brown (MIL "malfunction indicator lamp" feed)
............E- dark blue (VATS fuel enable input)
............K- dk green (serial data class 2 out OBD-II connector)
