is it possible to use diablosport to....
The Predator has a tune that is set up for a stock/bolt-on car out of the box.
From there, it has a bank of adjustable parameters such as injector slope, WOT fuel (in 3 RPM ranges) and WOT timing (3 RPM ranges). This makes it possible through logging to dial in simple combos that improve airflow.
The range of adjustment (+/-25% fuel at WOT, +/-10* at WOT) is enough for simple changes, but swapping cams will always require custom tuning for proper idle quality and driveability. This is where our CMR software comes into play.
You can get a baseline in the car to get it running if necessary using the Predator, then take it to a local shop that has our CMR tuning software. They can tune it on the dyno, load the tune to your Predator, and send you on your way.
This way you have the ability to still make changes to the tune if needed (gear swap, tire size, shift point or rev limit changes) whenever you want, without the need for a laptop.
Let me know if you have any other questions.
Thanks
Mike
Here's a thread I posted a few weeks ago. Results of the tune on my buddies 00 FRC C5 TT.
786 RWHP, pump gas, no meth, 12 psi. CMR tuned. Flashed to the car with a Predator. No problem.
https://ls1tech.com/forums/dynamometer-results-comparisons/994585-786-rwhp-stock-bottom-end.html
We also are responsible for the tuning of the fastest 05+ Mustang out there, running 8.7's and making over 1000 rwhp, all through a CMR tuned stock PCM.
There also would not be any powerful HEMIs out there to this day had we not brought custom tuning to that market before anyone else.
Thanks
Mike
786 RWHP, pump gas, no meth, 12 psi. CMR tuned. Flashed to the car with a Predator. No problem.
https://ls1tech.com/forums/dynamometer-results-comparisons/994585-786-rwhp-stock-bottom-end.html
We also are responsible for the tuning of the fastest 05+ Mustang out there, running 8.7's and making over 1000 rwhp, all through a CMR tuned stock PCM.
There also would not be any powerful HEMIs out there to this day had we not brought custom tuning to that market before anyone else.
Thanks
Mike
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Registered User
Joined: Oct 2008
Posts: 23
Likes: 0
Hmmm...how about these guys:
Mopac Auto Supply Ltd.
19950 84th Ave
Langley BC, V2Y3C2
604-881-4900
langleysales@mopacautosupply.com
They are listed as both Ford and GM CMR tuners, and can handle whatever you may need....give them a call.
Thanks
Mike
Mopac Auto Supply Ltd.
19950 84th Ave
Langley BC, V2Y3C2
604-881-4900
langleysales@mopacautosupply.com
They are listed as both Ford and GM CMR tuners, and can handle whatever you may need....give them a call.
Thanks
Mike
Thread Starter
Registered User
Joined: Oct 2008
Posts: 23
Likes: 0
Hmmm...how about these guys:
Mopac Auto Supply Ltd.
19950 84th Ave
Langley BC, V2Y3C2
604-881-4900
langleysales@mopacautosupply.com
They are listed as both Ford and GM CMR tuners, and can handle whatever you may need....give them a call.
Thanks
Mike
Mopac Auto Supply Ltd.
19950 84th Ave
Langley BC, V2Y3C2
604-881-4900
langleysales@mopacautosupply.com
They are listed as both Ford and GM CMR tuners, and can handle whatever you may need....give them a call.
Thanks
Mike
I saw them on your list but Lordco just sells parts, supplies,etc and isn't a cmr tuner. I don't know why you guys have them listed as a tuner on your website.
As far as I know they do tuning at this shop, have you given them a call?
