P0101 Code
Thread Starter
10 Second Club
Joined: Aug 2005
Posts: 567
Likes: 0
From: Tennessee Tech
P0101 Code Over the wkend I replaced some blown head gaskets on the camaro. After we got everything back together i took it up the road and it drove like it had a misfire but none of the cyl. were showing a misfire on hptuners and it wasn't throwing any codes...? But by the time we got back to the shop it started throwing crazy codes i had never heard of... for 2 days it was throwing various loss of communication codes, and still ran like crap. Today i get in it and check the codes to post them on here and the only ones it shows now are p0101 code, which is a MAF code, and 2 lean codes for both banks... So i got on here and researched alittle and found a post with the similar problem, i ended up going into the Maximum Delta Airflow table and multiplying the table by 4. I took it up the road a minute ago and it actually ran fine, except when i'm going down the road i don't have to push the gas for it to accelerate... it idles way too high when just driving down the road but when i come to a complete stop it takes 2 seconds till it drops to 900 rpm where its supposed to idle... Does anyone know what my problem is here? i let the car run for a minute when i got back to the house and noticed a distinct fuel smell so i'm thinking the problem is still in the MAF?
Thread Starter
10 Second Club
Joined: Aug 2005
Posts: 567
Likes: 0
From: Tennessee Tech
IDK why but when we put the grounds on i put two grounds on one bolt... and it threw the crazy codes so i thought that could be the prob. and put them on seperate bolts. I made sure all three were tight so i could rule them out.
