From the HP tuners DTC scanner I keep getting the following codes from my 2000 WS6:

[Brake] C0240 - (History)
[Brake] U1300 - Class 2 Short to Ground (History)
[Restraints] U1000 - Class 2 Communication Malfunction (History) (Immature)
[Restraints] U1016 - Loss of Class 2 Communication with VCM (History) (Immature)
[Restraints] U1040 - Loss of Class 2 Communications with ABS (History) (Immature)
[Restraints] U1096 - Loss of Communications with IPC (History) (Immature)

I'm not really sure what any of these mean or how to get rid of them (they can't be cleared). Is it possible there is a short in the wiring of the brake system somewhere? This has been there since I first had the scanner, but who knows how long the codes have been in there before that. Any help would be greatly appreciated!

 

TTT... has anyone seen this?

 

Unplug your battery and see if they come back.

Maybe their software just didnt erase them properly after a flash.

The modules are normally shut up during a flash event and then the codes deleted after the flash so all is normal again.