going with a mega squirt stand alone and it has a built in MAP sensor. now should i also upgrade my stock MAP sensor as well? or would staying with stock be fine becuse MS2 will be running the motor

 

no one knows?

 

If your running the stock 94 computer, I don't think you can put a 2 bar map in it with out a LOT of work cutting all the map tables in half for the 2 bar since there is nothing like the custom os's the new pcm tuning suites have. Since the stock computer will be pretty much just running the tranny, and timing I would just leave it alone.

 

its a MS2/ stock computer hybrind. MS2 takes care of running the motor, well the stock comptuer looks after the ABS AC and all that

the MS2 has a built in MAP sensor, but i wasent sure if the stock computer that will be looking after every thing els should be able to see the boost as well

?

 

There is no need for the stock computer to see the boost then. The 2.5 bar is only need for fuel calculations and possibly timing, and since the MS2 is doing that with its 2.5bar MAP then your fine with 1 bar for everything else.

 

awasome, thanks