codes?
codes? how to get rid of them? and what do about them? the car is a 2000 Z28 auto.
the codes are 1. system running to lean in bank 1
2. cyclindar number 2 misfiring
car has 72XXX miles on it
mods: are mac headers and y-pipe no cats (with mil elimators)
msd wires and TR6 plugs just installed with headers about 2 weeks ago.
fipk k&n (it removes the stock air box)
3.42gear
hypertech
thanks matt
the codes are 1. system running to lean in bank 1
2. cyclindar number 2 misfiring
car has 72XXX miles on it
mods: are mac headers and y-pipe no cats (with mil elimators)
msd wires and TR6 plugs just installed with headers about 2 weeks ago.
fipk k&n (it removes the stock air box)
3.42gear
hypertech
thanks matt
TECH Resident
Joined: Jul 2003
Posts: 834
Likes: 0
From: Marysville, OH
Re: codes? I would think that your HPPIII is making your car run lean so try it w/o it and see if the lean condition continues. Cylinder #2 is the front passenger side. Check the plug and wire to see what caused the missfire. Since you are running TR6's(35 gap I think) you may need to change to TR55's(55 or 50 gap). Unless you are shooting juice to your engine I do not think that the gap should be that small. Also you may have an exhaust leak getting to your O2 causing it to give a false lean condition, check all of the header connections. Your motor may be trying to compensate for the lean condition by sending more fuel and thus causing the misfire, just a theory though.
Any local AUTOZONE or Advance Auto should be able to clear your codes for free.
Any local AUTOZONE or Advance Auto should be able to clear your codes for free.
