New member (need Help)

Reply Subscribe

Thread Tools

Search this Thread

Oct 21, 2003 | 03:04 PM

SunOrangeZ28

Thread Starter

Teching In

Joined: Oct 2003

Posts: 12

Likes: 0

New member (need Help)

new member but long time reader
i have a 98z28 and the check engine light came on while racing a mach1. the code said PO103. does anybody have a clue what it is. sorry for the long post.
p.s. i ate the mach

Oct 21, 2003 | 04:28 PM

SunOrangeZ28

Thread Starter

Teching In

Joined: Oct 2003

Posts: 12

Likes: 0

Re: New member (need Help)

forgot to say it said mass or volume air flow circuit high input.

Oct 22, 2003 | 02:51 AM

blk~2000~Z28

TECH Resident

Joined: Jul 2003

Posts: 834

Likes: 0

From: Marysville, OH

Re: New member (need Help)

Does not sound to serious if your car is still running fine. I would clear the code and see if it returns. If it does then I would post on here for solutions to the problem, other than that I would not worry about it to much if it never comes back.

Oct 22, 2003 | 03:07 PM

J&JsTA

TECH Apprentice

Joined: Dec 2001

Posts: 357

Likes: 0

From: Whitby Ont Canada

Re: New member (need Help)

Quote:

Code P0103 is set when you the go above the stock freq capability of the MAF 11,500 hertz for a certain period of time???? so many sec.. I forget how many

..... perhaps more then 8

Oct 22, 2003 | 06:39 PM

Bink

TECH Addict

Joined: Jul 2002

Posts: 2,261

Likes: 0

Re: New member (need Help)

Quote:

p.s. i ate the mach

Atta boy!

Oct 22, 2003 | 10:21 PM

SunOrangeZ28

Thread Starter

Teching In

Joined: Oct 2003

Posts: 12

Likes: 0

Re: New member (need Help)

so it's nothing to worry about.

Oct 23, 2003 | 08:36 PM

SunOrangeZ28

Thread Starter

Teching In

Joined: Oct 2003

Posts: 12

Likes: 0

Re: New member (need Help)

i had the code cleared and today was out driving just got done beating up on a $80,000 NSX. stop at a light and seen the check engine light.
What is a way to fix my prob. a new mass air sen. HELP