timing table help
timing table help anyone have a pic or file of a timing table they care to share?
looking for something like a big cammed big stalled 408, or something close.
having some issues with part throttle and cruise, and im not sure if i have my timing too high or two low.
looking for something like a big cammed big stalled 408, or something close.
having some issues with part throttle and cruise, and im not sure if i have my timing too high or two low.
popping and banging through the midrange while normal driving in traffic.
idle is spot on, wot is clean.
even with its popping, i can floor it and there is no hesitation, bog, anything.
ruling out fuel for the moment.
how much timing should it have 2000-3000 rpms while accelerating in traffic?
anything over 1/2 throttle it goes away.
ive read where some guys run as much as 40 degrees depending on TPS position.
idle is spot on, wot is clean.
even with its popping, i can floor it and there is no hesitation, bog, anything.
ruling out fuel for the moment.
how much timing should it have 2000-3000 rpms while accelerating in traffic?
anything over 1/2 throttle it goes away.
ive read where some guys run as much as 40 degrees depending on TPS position.
i dont have the capability to post a tune, i really dont have a tune.
its a 6010 msd box. was hoping to see an image like this of something similar just to get some ideas of where im at.
its a 6010 msd box. was hoping to see an image like this of something similar just to get some ideas of where im at.
