LC1 Analog output splitting
04-01-2010, 04:35 AM
#1
Teching In
Thread Starter
Join Date: Aug 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
LC1 Analog output splitting Im installing my lc1 on the NB bung and using the analog output 1 to the ecu to simulate the narrow band, so this leaves me with the wideband output and 3 things to connect, one is the db gauge, the microedge and also I want to wired up to hptuners trough the a/c sensor.
If I made 3 divisions out of the analog2 for each one of these and try to running all at the same time its going to cause some trouble or a misreading in one or all of the stuff wired?
If I made 3 divisions out of the analog2 for each one of these and try to running all at the same time its going to cause some trouble or a misreading in one or all of the stuff wired?
