Help! How to put tunes on my EfiLive v2
04-07-2010, 09:25 PM
#1
13 Second Truck Club
Thread Starter
iTrader: (1)
Join Date: Feb 2008
Location: Sublette, KS
Posts: 1,323
Likes: 0
Received 0 Likes
on
0 Posts
Help! How to put tunes on my EfiLive v2 I read somewhere I can put tunes on my EfiLive V2 handheld and then put them on my truck without the laptop. If so, HOW? If I put a .tun file on my V2 it wont recognize it...
04-08-2010, 03:52 AM
#4
TECH Enthusiast
Join Date: Nov 2006
Location: Katherine N.T Australia
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
It doesn't work with a .tun file. Re-save the file as a .ctd file in the tune tool (I think that's what I saw them come out as).
It works great. I've been doing plenty over the last week.
It works great. I've been doing plenty over the last week.
Last edited by macca_779; 04-09-2010 at 06:16 AM.
04-08-2010, 10:19 PM
#5
TECH Senior Member
You have to have the March 30th 2010 release of both software/firmware.
You have to copy to V2 the correct _R and _W files for your PCM.
Like macca said, save an existing .tun file as .ctd, copy it to V2...
take V2 to vehicle, go down the Tune Tool menu, select Program and select the .ctd file...
confirm Yes, and wait for the progress bar to finish (about 23-25 seconds).
You have to copy to V2 the correct _R and _W files for your PCM.
Like macca said, save an existing .tun file as .ctd, copy it to V2...
take V2 to vehicle, go down the Tune Tool menu, select Program and select the .ctd file...
confirm Yes, and wait for the progress bar to finish (about 23-25 seconds).
