PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

New cam, intake, TB, and injectors and car want start?

Thread Tools
 
Search this Thread
 
Old 07-15-2010 | 06:42 AM
  #1  
t72ss402's Avatar
Thread Starter
On The Tree
iTrader: (10)
 
Joined: Mar 2008
Posts: 154
Likes: 0
From: Bolivar, MO.
Default New cam, intake, TB, and injectors and car want start?

Ok installed new cam(228/232 588/595 114lsa), intake(96mm typhoon), TB(95mm PTM), and set of LS7 injectors(42#).

The car will run for about 10 sec. then die. Unplug the injectors then it will run until all gas is burnt out plug them back in and again 10 sec. and die.

Car has not been tuned yet, waiting in line.

Is it the tune since I switched from 28# injectors to 42# could it be flooding it?
Old 07-15-2010 | 08:12 AM
  #2  
Old Geezer's Avatar
TECH Senior Member

iTrader: (3)
 
Joined: Jun 2004
Posts: 5,640
Likes: 69
From: GA, USA
Default

Do not run the engine until you get the tune corrected. You will wash the walls and generally make a mess...
Old 07-15-2010 | 06:15 PM
  #3  
t72ss402's Avatar
Thread Starter
On The Tree
iTrader: (10)
 
Joined: Mar 2008
Posts: 154
Likes: 0
From: Bolivar, MO.
Default

Ya not going to run it until I get a tune. The crank sensor was not in all the way and that is why it would not stay running.

Thanks Tim.
Old 07-18-2010 | 12:27 AM
  #4  
bigfatls6's Avatar
TECH Resident

iTrader: (34)
 
Joined: Jan 2008
Posts: 899
Likes: 0
From: Houston Tx
Default

With the swapp from 28 to 42 injectors your way rich also need to get it tuned




All times are GMT -5. The time now is 08:00 PM.