Help with EFIlive log file
Thread Starter
TECH Enthusiast
Joined: Dec 2003
Posts: 535
Likes: 0
From: Warner Robins, GA
Help with EFIlive log file Would anybody mind viewing a 15 min segment of my Z06 EFILive V6 file and tell me if they think my engine is OK. It seems to me the O2 sensors are going wacky. They are all over the place and the left and right LTFTs differ significantly.
Thanks,
John
Thanks,
John
Originally Posted by jub jub
JRP...you've got mail!
sorry, spelt my own damn email address wrong
its layzie3@juno.com forgot the E in the first one. send it again if you can. 
ok, looked over it. LTFT's look okay, there in the negative and just slighly postitve at times at .08 or so. you spark is all over the place though ranging from 40* to 4.4* 
. and is it just me or is your o2 voltage not on there 
. im more versed in V5 then V6 and i couldnt find the o2 PID on V6.
. and is it just me or is your o2 voltage not on there . im more versed in V5 then V6 and i couldnt find the o2 PID on V6. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by jub jub
I can send the PID file. Would that help?
Thread Starter
TECH Enthusiast
Joined: Dec 2003
Posts: 535
Likes: 0
From: Warner Robins, GA
Thanks JRP. I'm going to log more data once the weather gets better. I want to get a good sampling from different RPM ranges under a constant load as well as some WOT 
.
Since I'm new to this, all the help is appreciated. BTW, there are some great guys on the EFILive forum as well!
. Since I'm new to this, all the help is appreciated. BTW, there are some great guys on the EFILive forum as well!
Teching In
Joined: Dec 2001
Posts: 387
Likes: 0
From: Southern IN, USA
I hope that's some dark import beer ! 
Timing from 0 to 45 degrees is possible, remember, these aren't springs and weights anymore!
BTW, in v5 and V6 there is a default PID file, but it's best to log only what PID's you need to keep frame rate as high as possible.
Timing from 0 to 45 degrees is possible, remember, these aren't springs and weights anymore!
BTW, in v5 and V6 there is a default PID file, but it's best to log only what PID's you need to keep frame rate as high as possible.
12 Second Club
Joined: May 2002
Posts: 262
Likes: 1
From: Holiday, Fl.
Originally Posted by jub jub
Thanks JRP. I'm going to log more data once the weather gets better. I want to get a good sampling from different RPM ranges under a constant load as well as some WOT .
Since I'm new to this, all the help is appreciated. BTW, there are some great guys on the EFILive forum as well!
. Since I'm new to this, all the help is appreciated. BTW, there are some great guys on the EFILive forum as well!
THANKS!!
Teching In
Joined: Dec 2001
Posts: 387
Likes: 0
From: Southern IN, USA
) 