overdrive is not kicking-in
Thread Starter
Registered User
Joined: Aug 2010
Posts: 1
Likes: 0
overdrive is not kicking-in 2004 corvette L-1 complete engine & drivetrain mounted on a 34 Ford.
Need to identify the wire coming out of the ECU to the torque converter lock-up. Currently, the overdrive is not kicking-in.
Need to identify the wire coming out of the ECU to the torque converter lock-up. Currently, the overdrive is not kicking-in.
You need two wires. One for the TCC apply and one for the
TCC PWM. Apply is active when grounded. PWM you could
tie to IGN for full duty.
I think there are links to PCM pinouts in the stickies.
TCC PWM. Apply is active when grounded. PWM you could
tie to IGN for full duty.
I think there are links to PCM pinouts in the stickies.
