domestic disturbance

iTrader: (35)

Hey guys I just bought a lm-2 and im trying to tinker with it, I hooked it up to a bolt ls6 intake c5 corvette, and ran it down the rd, at wot its reading upper 9's lower 10's that seemed pretty low to me, I was wondering if someone has a chart for a/f readings they could post or something, and what those readings off the c5 vette sound like!

Thanks alot chris!

SSPerformance

iTrader: (76)

Did you do a free air calibration on it first

domestic disturbance

iTrader: (35)

I did but one 02 sensor was already in exhaust and other was free air.... I have the dual sensor setup

Old Geezer

iTrader: (3)

Grounds??

Hemi2Slo

Probably should do a free air calibration on both of them first, then rerun it. Those things are kinda finicky from my experiences with them. Trying that might help, otherwise that is really rich.

Orangemagic

iTrader: (2)

Had the same problem with mine. Just had to do a fresh air relearn and it was good to go.