Hey everybody,
I have an LQ4 with ls6 intake and fuel rails, cam, 85mm maf, long tubes, and no cats. The computer im using to run it is an 02 camaro comp and my injectors are 0 280 155 931 which are 28.55 lb/hr at 43.5 psi...

With my fuel pressure at 58 psi, the calculations that I come up with for 0 kpa are about 33 lb/hr but the stock value in my IFR table for 0 is 28. Should I put the calculated values in or leave it stock, I'm wondering cause my mail order tuner didn't change them...