PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

2010 Camaro Tune Question

Thread Tools
 
Search this Thread
 
Old 06-09-2011, 07:43 PM
  #1  
On The Tree
Thread Starter
iTrader: (13)
 
Hantzum's Avatar
 
Join Date: Apr 2008
Location: odessa
Posts: 102
Likes: 0
Received 0 Likes on 0 Posts

Default 2010 Camaro Tune Question

Ok, Just did a cam swap on a 2010 camaro hear and for some reason we keep blowing the odd side injector fuse which is a 20amp. The diagnostic report on HP tuners shows up as all individual codes but injector 1,3,5,7 are all pending immature and of course the car sounds like **** because its only firing on the passenger side! Any ideas as to what could be causing this blowing fuse? I think there could be a short some where causing the fuse to blow everytime the ignition is turned on!
Thanks
Old 06-11-2011, 09:25 AM
  #2  
LSX Mechanic
iTrader: (89)
 
Damian's Avatar
 
Join Date: Nov 2001
Location: Atlanta
Posts: 10,389
Likes: 0
Received 11 Likes on 8 Posts

Default

Unless this was an L99 car and you were removing the top end of the motor, I don't see any reason why the injector harness would have been disturbed in the first place.

Check all the grounds and make sure everything is tight.




All times are GMT -5. The time now is 06:34 AM.