PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

5.3/auto swap dbw hesitation ?

Thread Tools
 
Search this Thread
 
Old 07-28-2011, 01:49 PM
  #1  
Launching!
Thread Starter
iTrader: (5)
 
wantsum410's Avatar
 
Join Date: Apr 2005
Posts: 298
Likes: 0
Received 1 Like on 1 Post

Default 5.3/auto swap dbw hesitation ?

I did a '04 5.3 /auto setup in a 1957 p/u .All stock & there seems to be a hesitation if you try to accelerate slowly but if you stomp it there is good response. Thanks for any help !
All the pedal & tach module are out of the donor tck .
Old 08-01-2011, 07:33 PM
  #2  
Launching!
Thread Starter
iTrader: (5)
 
wantsum410's Avatar
 
Join Date: Apr 2005
Posts: 298
Likes: 0
Received 1 Like on 1 Post

Default

Surely there is somebody out here who has had this issue ?Anybody ?
Old 08-08-2011, 07:03 PM
  #3  
Launching!
Thread Starter
iTrader: (5)
 
wantsum410's Avatar
 
Join Date: Apr 2005
Posts: 298
Likes: 0
Received 1 Like on 1 Post

Default

Any ideas...what do I need to look for on my HP Tuners ?
Old 08-08-2011, 08:49 PM
  #4  
10 Second Club
iTrader: (3)
 
MontecarloDrag's Avatar
 
Join Date: Aug 2005
Posts: 889
Likes: 0
Received 4 Likes on 4 Posts

Default

Originally Posted by wantsum410
Any ideas...what do I need to look for on my HP Tuners ?
Several things. Is it tuned?

Log AFR at part throttle (with a wideband)
Is it entering closed loop?
Scan for any DTC
Old 08-09-2011, 08:15 AM
  #5  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

Jim in PA has done considerable research on the topic... Try a search.
There are table adjustments that can be made.. USE CARE doing them..
W/ EFILIVE, you have to have the Flashscan hooked to the laptop to see the table[s].



Quick Reply: 5.3/auto swap dbw hesitation ?



All times are GMT -5. The time now is 01:48 PM.