low oil level light

Reply Subscribe

Thread Tools

Search this Thread

May 4, 2012 | 04:26 PM

john shea

Thread Starter

12 Second Club

Joined: May 2004

Posts: 656

Likes: 0

From: hazelwood,Mo.

low oil level light

Is there a pin I can remove to turn this light off?

May 5, 2012 | 06:44 PM

sreve

TECH Fanatic

iTrader: (3)

Joined: Nov 2006

Posts: 1,101

Likes: 2

unpluging the switch at the pan should get the light out. If that does not work jump across the plug one or the other will work.

Attached Thumbnails

May 5, 2012 | 06:45 PM

SSickLS1SS

TECH Regular

Joined: Jan 2010

Posts: 450

Likes: 1

Quote:

Originally Posted by sreve

It appears to be a normaly open switch, unpluging the switch at the pan
should get the light out.

no it doesnt

May 5, 2012 | 09:14 PM

john shea

Thread Starter

12 Second Club

Joined: May 2004

Posts: 656

Likes: 0

From: hazelwood,Mo.

Quote:

Originally Posted by sreve

unpluging the switch at the pan should get the light out. If that does not work jump across the plug one or the other will work.

I tried both methods and neither works.

May 6, 2012 | 07:48 AM

sreve

TECH Fanatic

iTrader: (3)

Joined: Nov 2006

Posts: 1,101

Likes: 2

Hmmmmm................

Sounds like a continuity check would be the next thing to check.
From the blue c1 pcm connector pin 70 (blue) to brown wire @ the sensor
and the black\white wire @ the conector to grd.

May 6, 2012 | 08:45 AM

SladeX

TECH Addict

Joined: Nov 2005

Posts: 2,379

Likes: 2

For mine, I just replaced the sensor. I first verified with a voltmeter that I had power and check the ground that I had continuity to the engine block.