kevmac

iTrader: (1)

newb question, I didnt see on the hp tuner where i could set the iac, ie which tab or menu.
thanx

ScottyBG

Go under engine>idle>airflow>base running airflow the button to pull the table up is "idle airflow" and on the upper left side of that tab.

MontecarloDrag

iTrader: (3)

What do you want to acomplish?

jimmyblue

iTrader: (11)

If you want to directly control IAC position, that's done in
the scan tool, bidirectional controls. In normal operation
the IAC is messed around by the desired airflow -> steps
through a series of tables, calculations and closed loop
idle RPM control.

kevmac

iTrader: (1)

trying to get this thing to start without opening the throttle, it wont start unless the tps is at 6-7% its a mail tune just to get this lsx camaro up and going.

MontecarloDrag

iTrader: (3)

You can modify the IAC park position. That table makes the IAC to go to a specified position when the engine is shut down. Next time it's started the IAC will be in the position you want and it makes the engine rev to a high rpm until it settles down.

It's not the correct way to do it, but it helps.