01-02 LS6 MAF Sensor Pinout?
Thread Starter
Teching In
Joined: Apr 2004
Posts: 14
Likes: 0
From: Luckytown, USA
01-02 LS6 MAF Sensor Pinout? Noobie here
Anyone have a schematic or know the pinout for the LS6 5 wire MAF plug. I know the three in the middle are the MAF and the 2 outer wires are the IAT, but anyone know what wires are what?
Anyone have a schematic or know the pinout for the LS6 5 wire MAF plug. I know the three in the middle are the MAF and the 2 outer wires are the IAT, but anyone know what wires are what?
https://ls1tech.com/forums/showthread.php?p=1141944
<right click, save as>
might work a little better, unless your either the owner, or moderator, you won't have access to edit posts
Ryan.
<right click, save as>
might work a little better, unless your either the owner, or moderator, you won't have access to edit posts
Ryan.
Great info jimmyblue. Do you know where to get that 5 pin connector? I see pace has the $38 adaptor wire with all 3 connectors, but I'd like to hardwire mine. Don't need all 3 connectors, since I'd just cut it up.
Casper's Electronics makes one that integrates the
F-body IAT and MAF harnesses to the 85mm MAF.
I have bought from them and they're on the ball.
Pace resells this one at a markup. About $30 from
Casper's. If you knew this was a mod to keep, I'd
cut and solder and eliminate a couple of feet times
five wires from the engine compartment wireball.
F-body IAT and MAF harnesses to the 85mm MAF.
I have bought from them and they're on the ball.
Pace resells this one at a markup. About $30 from
Casper's. If you knew this was a mod to keep, I'd
cut and solder and eliminate a couple of feet times
five wires from the engine compartment wireball.
