IF BUCK MASTER HAS A FAST THROTTLE BODY LIKE HE SAYS HE DOES THEN IT GOT A SET SCREW ON IT

 

Uh, unless I read it wrong, the title of this thread said. "FAST 90mm Manifold & 90mm TPIS TB

 

It is a 90mm TPIS TB and 90mm FAST Manifold. The tuning is still not right and cannot be done. I can't even tell you how frustrating this is. We areputting the sotck TB and manifold back on.

It appears that is easier to tune this combo on head/cam cars that BIG strokers.

 

Sorry For The Missed Comunaction On That But Fast Is Coming Out With A 90mm Fly By Wire Within 4 To 5 Weeks

 

Four to five weeks in "FAST speak" might mean 4 to 5 months!

 

Buckmaster Give Me A Chance To Fix The Throttle Body Before You Give Up Send It To Wilson Manifolds Attention Tim At Can Hurt Let Us Look At It Maybe We Can Help Maybe Cant

 

On my TPIS 90mm, The first time I manually opened the blade to full throttle the spring slipped ad held it wide open!!! Luckily it was in my hand and not on the car. The spring fits sooo loose it does not close the blade fully..theres like and extra 1/4 it needs to pull. if I wind the spring around one more time the tension is very very tight. Not happy at the moment, but I guess i should have it installed before i complain too much. This has turned in a bling bling thing... until tuners or we regular people figure it out.

 

Well Lou G of LG Motorsports has successfully tuned an ARE 436ci motor (same as mine) with the 90mm set-up and the car is perfect.

Lou even offered to help with my car for FREE while it is at ARE yet NOONE will take the simple step of picking up the phone to take the help.

Talk about frustrating. I just want my car back!!!!!!!!!!!!! I am putting the stock TB and manifold back on, getting it tuned (I hope), taking care of a clutch issue too............and getting the car home.