4L80E Input Torque
Thread Starter
TECH Regular
iTrader: (22)
Joined: May 2010
Posts: 401
Likes: 2
From: Long Island, NY
4L80E Input Torque Originally posted in the automatic transmission section but got no responses there.
I downloaded the stock ECM program using HP Tuners the other day using a bench harness.
The trans is a stock 4L80E. Going thru the different tabs I came across the torque input.
It is factory rated at 610 ft/lb in stock form.
New to HP Tuners and wanted to share this info.
Am I reading this correctly?
Mike
I downloaded the stock ECM program using HP Tuners the other day using a bench harness.
The trans is a stock 4L80E. Going thru the different tabs I came across the torque input.
It is factory rated at 610 ft/lb in stock form.
New to HP Tuners and wanted to share this info.
Am I reading this correctly?
Mike
It is just a limit, it isn't like you are going to hit it with a stock engine, so mostly changing those things that have super high limits already will not make a change.
You can always make a small change to things and see if you can see or feel a difference. If no change, then you can go back to stock settings in a quick flash.
You can always make a small change to things and see if you can see or feel a difference. If no change, then you can go back to stock settings in a quick flash.
