i f*cking hate tuning
#21
TECH Senior Member
See this pic:
Do not forget the 2.5mm stereo jack-like blank terminator plug, this goes into the LC-1 SERIAL IN (it takes some effort to push in, lube it)
serial-port-cable-that-goes-to-v2
Do not forget the 2.5mm stereo jack-like blank terminator plug, this goes into the LC-1 SERIAL IN (it takes some effort to push in, lube it)
serial-port-cable-that-goes-to-v2
Last edited by joecar; 04-12-2013 at 07:19 PM.
#22
TECH Senior Member
First download/install the latest software RC4 from the forum site: EFILive-RC-4-%28April-10-2013%29
Then start the V8 Scan&Tune program...
to configure V2 to see the serial comms from the LC-1 see this:
Then with V2 connected to vehicle you should be able to go down the V2 LCD menu to display realtime wideband data.
Then start the V8 Scan&Tune program...
to configure V2 to see the serial comms from the LC-1 see this:
Then with V2 connected to vehicle you should be able to go down the V2 LCD menu to display realtime wideband data.